Traffic white 9005 powder coating

resistance GB/T1771-91 No change in coating film for 1000 hours,single side corrosion<2mm at the cross-section

Wet heat

resistance GB/TI740-79 >1000 hours of light loss,≥l

Corrosion

resistance toaging test ASTM Gl540UV0.78w/m/@340nm 500h Guaranteed light rate

≥80%

Note: The above parameters are laboratory data and are for reference only. The actual indicators are related to the customer's environment, equipment, substrate, pre-treatment, spraying process and other factors.

APPLICATION CONDITION

Pre-treatment: sting treatment, inscription processing; jet black 9005 powder coating is suitable for the following equipment coating: corona electrostatic spraying, friction electrostatic spraying, electrostatic fluidized bed spraying.Curing conditions:200·C@ 10 minutes,1800C @ 15 minutes, can also be designed according to customer needs.

PACKAGE

Packed in carton, net weight 20kg/carton, h polyethylene plastic bag

STORAGE CONDITIONS

Dry and ventilated indoor storage below 30 C, avoid direct sunlight. Under these conditions, the powder can be stored stably for 12 months. If it meets the requirements, it can still be used.

SAFE AND HEALTHY

All raw materials of powder coating do not contain ces, and will not release uring baking.

but should avoid inhaling dust during use. Operators should wear dust masks and minimize long-term between skin and powder. The paint on the skin can be washed with soap.