Roland DWX-4 Compact Dental Mill

DWX-4 Milling Machine SpecificationsCuttable MaterialZirconia (pre-sintered), Wax, PMMA, Lava™ Ultimate RestorativeLoadablework – piece shapeBlockWidth x Depth: 76×38, Height: 10 to 22 mmPIN typeWidth x Depth x Height: Maximum 85 x 40 x 22 mmOperating speedXYZ axis: 0.24 to 70.8 in./min. (6 to 1800 mm/min.)Spindle motorBrushless DC motorSpindle speed6,000 to 30,000 rpmRotary axis travel angleA: ±360°of tools housed2Attachable toolShank diameter: 4 mm, Length: 40 to 55 mmCompatible compressed air0.02 to 0.2 MPaInterfaceUSB (compliant with Universal Serial Bus Specification Revision 1.1)Control command setRML-1, NC codePower requirementsVoltage and frequency:AC100 to 120 V/220 to 240 V ±10 %, 50/60 Hz

(overvoltage category II, IEC 60664-1)

Required power capacity:2.0 A (100 to 120 V)/1.0 A (220 to 240 V)Power consumptionApprox. 70 WOperating noiseDuring operation:70 dB (A) or less (when not cutting)During standby:40 dB (A) or lessExternal dimensionsWidth x Depth x Height:13.4×14.4×16.0 in.

(340×365×405 mm)

Weight48.5 lbs (22 kg)Installation EnvironmentIndoor Use, altitude:up to 2000 mTemperature:41 to 104 °F (5 to 40 °C)Relative humidity:35 to 80 % (no condensation)Ambient pollution degree:2 (as specified by IEC 60664-1)Short-Term Temporary Overvoltage:1440 VLong-Term Temporary Overvoltage:490 VIncluded itemsPower cord, USB cable, Manual, Software Package CD-ROM, Detection pin, Automatic correction jig, Clamp for block workpiece, Hexagonal screwdriver, spanner, Tool holder, Tool positioner, Dust collection hose, Regulator, etc.System requirements for included EasyShape CAM softwareOperating SystemWindows 7 or Windows 8.1 (32 or 64 Bit)Recommended CPUi7 or better *AMD not recommendedMemory (RAM)4GB or more

*More RAM may be required if running multiple instances of EasyShapeCAM

4GB of RAM will require a 64-Bit OS

Gracs CardNVIDIA GT series gracs card with a minimum 1GB or more of dedicated video memory *Non-Shared/Dynamic Memory – AMD/ATI gracs cards not recommendedHard DriveHard Disc Drive (HDD) – Discretionary based on how many STL Job Files are stored.

Solid State Drive (SDD) – May help read / write times slightly but is not necessary