MODELGX-300GX-400GX-500GX-640
Cutting method | Media-movement method |
Driving method | Digital control servo motor | Friction feed/Digital control servo motor |
Maximum cutting area | 29 x 984-1/8â³(737 x 24,998mm) | 39 x 984-1/8â³(1000 x 24,998mm) | 47 x 984-1/8â³(1195 x 24,998mm) | Width: 65â³ (1651 mm) |
Acceptable media width | 2 to 36â³(50 to 915mm) | 3-1/2 to 46â³(90 to 1178mm) | 3-1/2 to 54â³(90 to 1372mm) | 5-1/16â³ to 72.5â³ (130 mm to 1842 mm) |
Maximum cutting speed | During cutting: 33ips (850mm/sec.) [in all directions]During tool-up: 47 ips (1202mm/sec) [in 45º direction] | During cutting: 33.5â³/sec (850 mm/sec) (in all directions)During tool-up: 47â³/sec (1202 mm/sec) |
Cutting force | 20 to 350 gf | 1 to 85 cm/sec (in increments of 1 cm/sec), 20 to 350 grams force (increments of 10 grams) > |
Mechanical resolution | 0.00049â³/step (0.0125mm/step) | 0.000137â³/step (0.0035 mm/step) |
Software resolution | 0.00098â³/step (0.025mm/step) | 0.000984â³/step (0.025 mm/step) |
Distance accuracy | Error of less than ± 0.2% of distance traveled, or 0.00039 (0.1mm), whichever is greater | Error of less than 0.2% of distance traveled, or 0.00394Ⳡ(0.1 mm), which is greater |
Repetition accuracy | 0.1mm or less (excluding stretching/contraction of the material)Range for assured repetition accuracyFor materials with a width exceeding 24â³ (610mm): Length 157-7/16â³ (4000mm) (GX-400/500 only)For materials with a width of 24â³ (610mm) or less: Length 314-15/16â³ (8000mm) | 0.004â³ (0.1 mm) or less |
Interface | Serial (RS-232C compatible), USB (Rev. 1.1) | Serial (RS-232C-compatible), USB (Rev 1.1) |
Buffer size | 8MB (2MB for re-plot buffer) | 2 MB (buffer size: 8 MB) |
Power supply | AC 100V to 240V +/- 10% 50/60Hz 1.2A | AC 100V to 240V =/- 10% 50/60Hz 1.1A | AC 100V to 240V ±10% 50/60Hz 1.2A |
Power consumption | Approx. 95W | Approx. 100WApprox. 100W |
Acoustic noise level | Cutting mode: under 62 dB (A) Standby Mode: under 40 dB (A) (According to ISO 7779) | |
Dimensions with stand | 45-1/16(W) x 28-5/8(D) x 43-13/16â³(H)1144(W) x 727(D) x 1113mm (H) | 55-3/8(W) x 28-5/8(D) x 43-13/16â³(H)1407(W) x 727(D) x 1113mm(H) | 63-1/16(W) x 28-5/8(D) x 43-13/16(H)1602(W) x 727(D) x 1113mm (H) | 83-1/4 (W) x 28-5/8 (D) x 43-13/16 (H) in (2155 (W) x 727 (D) x 1113 (H) mm) |
Weight with stand | 97lb. (44 kg) | 112.4lb. (51 kg) | 121.2 lb. (55 kg) | 141.1 lb (64 kg) |
Operating temperature | 41 to 104F (5 to 40C) |
Operating humidity | 35 to 80% (non-condensing) |
Standard accessories | Power cord, blade, blade holder, alignment tool, cable clamp, replacement blade for separating knife, Roland Software Package CD-ROM (CutStudio design software, plug-ins for CorelDraw 10/11/12 and Adobe Illustrator 9/10/CS), startup guide, user manual | Power cord, blade holder (XD-CH2), pin, blade, blade (ZEC-U5022), alignment tool, cable clamp, replacement blade for sheet cutter, USB cable, Roland software CD-ROM, setup guide, userâs manual |