HLMX Superfine Verticle Mill Superfine Grinding Machine

HLMX Superfine Vertical Mill is large-scale non-metal mineral superfine powder mill developed by Hongcheng based on HLM Vertical Mill and introduction of foreign advanced technology. Hongcheng HLMX Vertical Mill applied static and dynamic classifier, product fineness can be adjusted between 325 mesh to 2500 mesh (5μm-10μm), maximum capacity reach 20t/h. The equipment is widely applied in non-metal mineral superfine powder processing, such as limestone, calcite, marble, coarse whiting, kaolin, barite, bentonite, pyrauxite. It is a high efficiency and low cost powder processing equipment.

HLMX Superfine Vertical Mill consist of main mill, feeder, classifier, blower, pipe system, storage hopper, electronic control system and collecting system.

The motor drives the reducer to rotate the millstone, the raw material are sent into the center of the millstone from the air lock rotary feeder. Under the effect of centrifugal force, the material moves to the edge of the millstone. Material than be ground by the force of the roller and smashed under extrusion, grinding and cutting. At the same time, hot air is blew up around the millstone and bring up the ground material. The hot air will dry the floating material and blow the coarse material back to the millstone. The fine powder will be brought to the classifier, and then, the qualified fine powder will flow out the mill and be collected by dust collector, other coarse powder will be brought down to the millstone by the blade of classifier and be ground again. The circulation like this is the overall process of grinding.