Environmentally friendly liquid sandblasting equipment Wet dust-free sandblasting machine

Manual liquid wet sandblasting machine TB-WN1111

According to the material, it can be divided into two types: glass steel body and stainless steel body.

Application range: This machine is widely used for sandblasting of stainless steel products, gold and silver jewelry, crystal glass products, electrical parts, metal products, etc.

Stainless steel body

Features:

1. Clean the oxide scale, residual salt and welding slag of heat-treated parts, welded parts, castings, forgings, etc. The cleaning quality can reach Sa3 level.

2. Clean up the tiny burrs and surface residues of machine parts.

3. Change the surface roughness Ra value of the workpiece.

4. It can be used as the pretreatment before coating on the surface of the workpiece to obtain an active surface and improve the adhesion of the coating.

5. It can be used for the finishing of high-precision and complicated parts that are difficult to complete by other processing methods.

6. It can be used to improve the sical and mechanical properties of the workpiece surface, such as changing the surface stress state, improving the lubrication conditions of the mating parts, and reducing the noise during the movement of the mating parts.

7. Suitable for refurbishment of old parts.

8. It is used for mold cleaning, does not damage the surface of the mold, ensures the accuracy of the mold, and improves the product quality.

FRP body

Product parameter：

Product size(mm)

Working chamber size(mm): 1100*1100*700

Door size(mm): 980*620

Product quality: about 320kg

Door opening method: side door

of spray guns: 1

Caliber(mm): 8

Power supply: 380V, 50HZ

Lighting lamp: 220V, 2*12W, LED light

Compressed air source pressure bar(kg/cm2): 5-8

Compressed air source air volume(m3/min): 0.8-1.5

Abrasive type: corundum abrasive is recommended, other abrasives are also allowed

Abrasive particle size: 30#~320#

Abrasive particle size: about 25kg

Grinding fluid storage: 50L

Water source: tap water for industrial use.

The parameters are for reference only, the machine can be customized.