| Product name | Tobee® 250mm vertical slag slurry pump |
Tobee® 250mm vertical slag slurry pump is centrifugal sump slurry pumps submerged in sump to work.It is designed for delivering abrasive, large particle and high density slurries. The pumps have no need of any shaft seal and sealing water. it can also be operated normally for insufficient suction duties. The submerged depth can be customed as different sump.
Tobee® 250mm vertical slag slurry pump Specification:
Size: 250mmCapacity: 261-1089m3/hHead: 7-33.5mSpeed: 400-750rpmEff.: 60%Power: Max.200kwHandling solids: 65mmMaterials: High chrome alloy, Rubber, Polyurethane, Ceramic etc
Tobee® 250mm vertical slag slurry pump Design Features:
• Bearing Assembly - The bearings, shaft and housing are generously proportioned to avoid problems associated with the operation of cantilevered shafts in the first critical speed zones.The assembly is grease lubricated and sealed by labyrinths; the upper is grease purged and the lower protected by a special flinger. The upper or drive end bearing is a parallel roller type whilst the lower bearing is a double taper roller with preset end float. This high performance bearing arrangement and robust shaft eliminates the need for a lower submerged bearing.• Column Assembly - Completely fabricated from mild steel. The TPR model is elastomer covered.• Casing - Has a simple bolt-on attachment to the base of the column. It is manufactured from a wear resistant alloy for the SP and from moulded elastomer for the TPR.• Impeller - Double suction impellers (top and bottom entry) induce low axial bearing loads and have heavy deep vanes for maximum wear resistance and for handling large solids. Wear resistant alloys, polyurethane and moulded elastomer impellers are interchangeable. The impeller is adjusted axially within the casting during assembly by external shims under the bearing housing feet. No further adjustment is necessary.• Upper Strainer - Drop-in metal mesh, snap-on elastomer or polyurethane for TP and TPR pumps. Strainers fit in column openings.• Lower Strainer - Bolted metal or polyurethane for TP, moulded snap-on elastomer for TPR.• Discharge Pipe - Metal for TP, elastomer covered for TPR. All wetted metal parts are completely rust protected.• Submerged Bearings - None• Agitation - An external agitator spray connection arrangement can be fitted to the pump as an option. Alternatively, a mechanical agitator is fitted to an extended shaft protruding from the impeller eye.• Materials - Pumps can be manufactured in abrasive and corrosive resistant materials.
Tobee® 250mm vertical slag slurry pump On-site Applications:
| • Mining• Mineral processing• Construction• Chemical and Fertilization• Power generation | • ste tion• Paper mill wastes and liquors • Precipitated CaCO3• Plaster• Bottom/fly ash, lime grinding | • Pulp and paper• Oil and gas• Waste water treatment• Dirty water• Waste sludge |
| • Ball mill discharge• Rod mill discharge• SAG mill discharge• Fine tailings• Flotation• Heavy media process• Minerals concentrate• Mineral sands | • Coal-washing plant• Coarse sand• Coarse tailings• Dredging• FGD• Wet crushers aplications• Wet scrubber systems • Process chemical | • Iron and Steel• Ni acid slurry• Fracking slurries• Clay and sand slurries• Kaolin clay• Carbon slurry• Lime mud• Oil sands• sric acid |
Mian Product: Horizontal slurry pumps, Submersible slurry pump, Vertical slurry pumps, vertical sump slurry pump Warman slurry pumps, Gravel sand pumps, hydraulic slurry pump, Dredging pumps, centrifugal sand pump, sand dredging pump,mining gravel pump,Paper pulp pumps, Molten Salt Pumps, End suction pumps, Double suction pumps, Multistage pumps, Boiler feed water pumps, Self priming pumps, Inrifugal pumps, Sea water pumps, Chemical pumps, Irrigation pumps, Fire pumps, API 610 centrifugal oil pumps, Submersible sewage pumps, Slurry Pump spare parts.
Hebei Tobee Pump Co.,Limited | | , ,
Signup today to claim your Discount. Get Started before it's too late!
