FRP fire water tank

Product characteristics:The structure of FRP container is composed of anti-corrosion and anti-seepage lining layer, reinforced structure layer and anti-aging outer layer. Ensure both good corrosion resistance and adequate sical and mechanical properties to meet the requirements of dressing.High tension, multi-level, multi-angle and wrapping head winding of glass fiber is adopted to meet the storage, transfer and production needs of organic and inorganic solvents and corrosive media with chemical and electrochemical properties, and to meet the needs of non-electrolyte fluid transfer, transportation and elimination of static electricity to meet the mechanical requirements of resisting various supporting shear, burial and load.The design flexibility is great and the tank wall structure performance is exnt. Fiber wound FRP can adjust the sical and chemical properties of storage tank by changing resin system or reinforcing material to meet the needs of different media and working conditions. Through the design of structural layer thickness, winding angle and wall thickness structure, the bearing capacity of the tank can be adjusted to meet the needs of different pressure levels, volume sizes and some special properties of FRP tanks. It is not comparable to isotropic metal materials.Corrosion resistance, leakage resistance, good weather resistance. Fiberglass reinforced plastics (FRP) has special corrosion resistance. When storing corrosive media, FRP shows incomparable advantages over other materials. It can resist various acids, alkalis, salts and organic solvents.It has exnt mechanical and sical properties. The material density of FRP tank products ranges from 1.8 to 2.1g/cm3, which is about 1/4 to 1/5 of steel. The fiberglass filament winding with diameter of 7 to 17 Mu is used to reduce the existence rate of micro-cracks in fibers and achieve equal strength. This forming method can make the fibre content as high as 80%, the specific strength is higher than steel, cast iron and plastics, and the thermal expansion coefficient is about the same as steel, and the thermal conductivity is only 0% of steel. .5%.Long service life and low maintenance cost.