Guy
Adjustable guy >
Design
This type of dead ends is a fast, simple safe method for retaining or securing cables such as stayires etc.
Standard products have an open helix loop but they can be supplied with a cabled loop to prevent he r prolonged installation.
The dead ends are made of material compatible with the cable to which they are applied
The dead ends with helical to given an even distribution of force ever a wide surface preventing strain concentration and potential damage to conductors.
Its breaking load exceeds that of the conductor to which is applied.
Note
The layer direction of distribution-grip dead ends must be the same as that of the outer stranding of the conductor to which it is applied.
Ordering Information
When ordering, please specify:
conductor type,stranding,breaking strength and lay direction
groove width and diameter of fitting used.
Guy-grip dead ends
Selection Chart
| Model | Sectional area (mm²) | Outside diameter(mm) | Clamp length(mm) | Clamp weight(kg) | Fittings (thimble clevisã€adjustable clamp) |
| NL-25G | 25 | 6.60 | 640 | 0.2 | 0.2 |
| NL-35G | 35 | 7.80 | 720 | 0.3 | 0.3 |
| NL-50G | 50 | 9.00 | 910 | 0.5 | 0.5 |
| NL-70G | 70 | 11.00 | 1020 | 0.8 | 0.8 |
| NL-95G | 95 | 12.50 | 1340 | 1.7 | 1.7 |
| NL-100G | 100 | 13.00 | 1340 | 1.7 | 1.7 |
| NL-120G | 120 | 14.00 | 1460 | 2.2 | 2.2 |
Signup today to claim your Discount. Get Started before it's too late!
