| Color | White |
Model HUR3103XR Application: FTTH FTTB FTTX Network Transmission Distance: 20km LAN Interface: 1 x 10/100/1000Mbps(GE) and 3 x 10/100Mbps(FE) PON Interface: 1 GPON BOB Class B+/Class C+ Optical Interface: SC/APC connector Single Fiber Wavelength: Tx1310nm/Rx1490nm Power Supply: DC 12V/1A Power Consumption: ≤6W Certification: CE/ROHS/ISO9001 Warranty: 1Year Type: FTTH Solutions
3.Specification
Technical item | Details |
PON Interface | 1 GPON BOB （Class B+/Class C+） |
Receiving sensitivity: ≤-27dBm/≤-29dBm | |
Transmitting optical power: +0.5~+5dBm/+2~+7dBm | |
Transmission distance: 20KM | |
Wavelength | TX: 1310nm, RX: 1490nm |
Optical Interface | SC/APC Connector |
Design Scheme | RTL9603C+RTL8192FR BOB(i7525BN) |
Chip Spec | CPU 950MHz,DDR2 128MB |
Flash | SPI Nor Flash 16MB |
LAN Interface | 1 x 10/100/1000Mbps(GE) and 3 x 10/100Mbps(FE) auto adaptive Ethernet interfaces. Full/Half, RJ45 connector |
Compliant with IEEE802.11b/g/n, | |
Operating frequency: 2.400-2.4835GHz | |
support MIMO, rate up to 300Mbps, | |
2T2R,2 external antenna 5dBi, | |
Support: Multiple SSID | |
Channel: Auto | |
Modulation type: DSSS, CCK and OFDM | |
Encoding scheme: BPSK, QPSK, 16QAM and 64QAM | |
CATV Interface | RF, WDM, optical power : +2~-15dBm |
Optical reflection loss: ≥45dB | |
Optical receiving wavelength: 1550±10nm | |
RF frequency range: 47~1000MHz, RF output impedance: 75Ω | |
RF output level: 78dBuV | |
AGC range: -13~+1dBm | |
MER: ≥32dB@-15dBm | |
LED | 11 LED, For Status of WIFIã€WPSã€PWRã€LOSã€PONã€LAN1~LAN4〠Worn〠Normal(CATV) |
Push-Button | 3,For Function of Reset, WLAN, WPS |
Operating Condition | Temperature: 0℃~+50℃ |
Humidity: 10%～90%（non-condensing） | |
Storing Condition | Temperature: -30℃~+60℃ |
Humidity: 10%~90%（non-condensing） | |
Power Supply | DC 12V/1A |
Power Consumption | ≤6W |
Dimension | 180mm×107mm×28mm（L×W×H） |
Net Weight | 0.2Kg |
4. Panel lights Introduction
Pilot Lamp | Status | Description |
WIFI | On | The WIFI interface is up. |
Blink | The WIFI interface is sending or/and receiving data (ACT). | |
Off | The WIFI interface is down. | |
WPS | Blink | The WIFI interface is securely establishing a connection. |
Off | The WIFI interface does not establish a secure connection. | |
PWR | On | The device is powered up. |
Off | The device is powered down. | |
LOS | Blink | The device doses not receive optical low td> |
Off | The device has received optical d> | |
PON | On | The device has registered to the PON system. |
Blink | The device is registering the PON system. | |
Off | The device registration is incorrect. | |
LAN1~LAN4 | On | Port (LANx) is connected properly (LINK). |
Blink | Port (LANx) is sending or/and receiving data (ACT). | |
Off | Port (LANx) connection exception or not connected. | |
Worn (CATV) | On | Input optical power is higher than 3dbm or lower than -15dbm |
Off | Input optical power is between -15dbm and 3dbm | |
Normal (CATV) | On | Input optical power is between -15dbm and 3dbm |
Off | Input optical power is higher than 3dbm or lower than -15dbm |
5.Application* Typical Solution：FTTH(Fiber To The Home)* Typical Business：INTERNETã€IPTVã€WIFI ã€CATV etc
Signup today to claim your Discount. Get Started before it's too late!
