1. Description of fda food grade liquid silicone rubber for making mould
Addition-curing, Food grade, Translucent, Two-component mold making silicone.
2. Characteristics of fda food grade liquid silicone rubber for making mould
Acceptable for food br> Outstanding release properties Low viscosity Easy mixing and degassing High flowability Odorless and Nonanced durability
3. Application of fda food grade liquid silicone rubber for making mould
Food Grade Related Applications Cake mold Chocolate moldmaking Candy moldmaking Baking moldmaking Ice trays molding Casting butters Casting for Kitchen products
4. Datesheet of fda food grade liquid silicone rubber for making mould
| Item No. | Appearance | Hardness (shore A) | Viscosity (CPS) | Tensile-strength ( kgf /cm2 ) | Tear-strength (kgf /cm2 ) | Elongation-break(%) | Mixing ratio | Operation time (25 ℃ ) | Curing time (25 ℃) | Shrinkage (%) |
| SP-805 | translucent | 5 | 3000±1000 | 30±5 | 8±2 | 550±50 | 1:1/10:1 | 20-30mins | 2-3h | ≤0.1% |
| SP-810 | translucent | 10 | 4000±1000 | 30±10 | 12±2 | 550±50 | 1:1/10:1 | 20-30mins | 2-3 h | ≤0.1% |
| SP-815 | translucent | 15 | 4000±1000 | 35±10 | 14±2 | 550±50 | 1:1/10:1 | 20-30mins | 2-3 h | ≤0.1% |
| SP-820 | translucent | 20 | 5000±1000 | 40±10 | 20±2 | 500±50 | 1:1/10:1 | 20-30 mins | 2-3 h | ≤0.1% |
| SP-825 | translucent | 25 | 6000±1000 | 45±10 | 22±2 | 500±50 | 1:1/10:1 | 20-30 mins | 2-3 h | ≤0.1% |
| SP-830 | translucent | 30 | 7000±1000 | 50±10 | 24±2 | 450±50 | 1:1/10:1 | 20-30 mins | 2-3 h | ≤0.1% |
5. Using instructions of fda food grade liquid silicone rubber for making mould
Step 1: Prepare and clean the prototype.
You must make sure your original molds perfect, fix the original mold on a board, then using some assistant material (like cardboard) to make a frame for to surround the prototype. The frame is no need, if we make the mold by brushing way.
Step 2: Take the silicone and catalyst as the ratio 100:2 (silicone : catalyst= 100:2), mix the silicone rubber and catalyst evenly.
Notes: rtv silicone rubber is a kind of flowing liquid and it contains two parts. Part A is a kind of flowing liquid and part B is the curing agent. Remember to mix part A and part B evenly, otherwise the silicone rubber will be partly solidified and this will bring troubles for your final operation. What's more, the finishes molds will have a short life. All of these will cause a waste of silicone rubber.
Step 3: Vacuum pumping.
After mixed the silicone evenly, it is better to release the bubble by vacuum pumping.
Step 4: Pouring cast or brushing cast.
After released the bubble, we can pour/brush the silicone rubber on the prototype.
Notes: Please finishes all the steps within the operation time. If not, it will cause cross linking reaction, and no more further steps will be available. So, we have to pay attention to the pot life and curing time.
Packaging & Shipping
Packing:
20KG/drum vacuum packing for part A + 20KG/drum vacuum packing for part B
25KG/drum vacuum packing for part A + 25KG/drum vacuum packing for part B
200KG/drum packing for part A +200KG/drum packing for part B
Why Choose Us?
1.Free Sample
2.Sample Test
3.Technical Support
4.Engineers Site Instruction
5.New products developing
6.New Market developing
7.Factory Visiting Reception
8.China visiting reception
9.China Latest silicone news
10.Related Products Purchasing Assistance
11.More than 8 years experience in producing liquid silicone rubber
Us
Any inquiry, feel free to Ms. Sybil:
Mobile:8
Tel: 8
e6
Website:
Signup today to claim your Discount. Get Started before it's too late!
