1.Description of rtv silicone rubber liquid for molding
It is a kinds of Two-parts silicone, part A is flowable liquid silicon, part B is curing agent/ catalyst ,which gets cured at room temperature 25â within 3-6 hours or heating curing .This product is perfect for cement , concrete stone, GRC and GFRC productsâ mold making,such as the flower pot , fountain,Polyurethane Wood Imitation,Reinforced Plastic,Garden Decorations ,fiberglass product and other decoration industries.
2.Features of rtv silicone rubber liquid for molding
(1).High duplication times and no deformation (2). Exnt tear strength and tensile strength. (3).Good fluidity and good operability and good for both pouring method and pouring method. (4).Exnt flexibility and itâs easy to demould. (5).It gets cured at room temperature 25â within 3-6 hours. (6).Suitable hardness from 30 to 40 shore A
3.Application of rtv silicone rubber liquid for molding Architectural Restoration Sculpting/Wax Casting Concrete/GRC Casting Gypsum/Plaster Decoration Polyester/Resin Crafts Molding Furniture Molding Candles MoldmaKing Soaps MoldmaKing Tire Molding Rapid Prototyping Urethane casting Detailed reproduction of figurines, art objects and similar items
4.Product Parameters of rtv silicone rubber liquid for molding
Item No. | Appearance | Hard ness (shore A) | Viscosity (CPS) | Tensile-strength ( N/mm² ) | Tear-strength (KN/m ) | Elongation-break(%) | Mixing ratio | operation time (25 â ) | Curing time ( 25 â) | Shrinkage |
C-820 | white | 20 | 16000±1000 | 3.6±0.5 | 20±2 | 400±50 | 100:2 | 20-30mins | 2-3h | â¤0.3% |
C-825 | white | 25 | 20000±1000 | 4.0±0.5 | 22±2 | 450±50 | 100:2 | 20-30 mins | 2-3 h | â¤0.3% |
C-830 | white | 30 | 22000±1000 | 4.5±0.5 | 26±2 | 480±50 | 100:2 | 20-30 mins | 2-3 h | â¤0.3% |
5.Attentions of rtv silicone rubber liquid for molding
(1). The curing speed of this product is closely related to the ambient temperature,high temperature fast curing, on the contrary, low temperature curing slow. Users can appropriately adjust the amount of curing agent to obtain the desired cure speed according to the ambient temperature level.
(2). If the copying original models are ceramic, 815 resin, ABS material, wood, metal and other materials, the original models surface need use a release agent or baking mold method then reperfusion mold for avoiding sticky mold nomenon.
(3). Two parts of this series of products should be stored separately sealed, placed in a cool place, avoid the sun and rain.
(4). If viscosity is increased or it has precipitation in silicone at storage period, can be used after mixing evenly, its performance unchanged.
(5). This product is non-dangerous goods, if skin the curing agent, can be cleaned with the suitable detergent and water; if splashed into the eyes, immediately wash with clean water at least 15 minutes, and consult a doctor.
6.Package&Shipping
package
Small size:5kg/jar,10kg/jar
General size:20kg/pail,25kg/pail,200kg/pail
Delivery Time
Depends on the express you choose and the destination
Via Express:General 3-7 business days worldwide
Shipping Cost
Based on the weight of the goods and the destination
Tracking No.
The tracking No. will be sent to you the next day after shipping
Why Choose Us?
1.Free Sample
2.Sample Test
3.Technical Support
4.Engineers Site Instruction
5.New products developing
6.New Market developing
7.Factory Visiting Reception
8.China visiting reception
9.China Latest silicone news
10.Related Products Purchasing Assistance
11.More than 8 years experience in producing liquid silicone rubber
Us
Any inquiry, feel free to Ms. Sybil:
Mobile:8
Tel: 8
e6
Website: