Zinc Alloy Ingot
Zinc alloy ingot Zamak #2/#3/#5
Zinc alloy ingot Zamak #2/#3/#5
Molecular Formula: Zn
Zn (purity): 98.7%-99.995%
Molecular Weight: 65.39
Density: 7.14( g/cm3)
Zinc alloy ingot manufacturer
Zinc alloy ingot China Application :
Zamak #2:Used to have special requirements for mechanical properties, high hardness requirements, dimensional accuracy requirements of the general mechanical parts
Zamak #3:Good fluidity and mechanical properties. Used in castings with low mechanical strength requirements
Zamak #5:Good fluidity and good mechanical properties. Used in castings with certain requirements for mechanical strength.
We also provide cheap copper scrap, Nikel Sheet, Tin Ingot, Magnesium Ingot and soon
Zinc ingot (GB/T470-1997) | ||||||||||
MARK | Zn≥ | Pb | Cd | Fe | Cu | Sn | Al | As | Sb | Total |
Zn99.995 | 99.995 | 0.003 | 0.002 | 0.001 | 0.001 | 0.001 | -- | -- | -- | 0.005 |
Zn99.99 | 99.99 | 0.005 | 0.003 | 0.003 | 0.002 | 0.001 | -- | -- | -- | 0.01 |
Zn99.95 | 99.95 | 0.02 | 0.02 | 0.01 | 0.002 | 0.001 | -- | -- | -- | 0.02 |
Zn99.5 | 99.5 | 0.3 | 0.07 | 0.04 | 0.002 | 0.002 | 0.01 | 0.005 | 0.01 | 0.5 |
Zn98.7 | 98.7 | 1 | 0.2 | 0.05 | 0.005 | 0.002 | 0.01 | 0.01 | 0.02 | 1.3 |
Chemical composition (EN1774)Guaranteed analysis ( %) | ZAMAK5ZL5/ZL0410ZNAL4Cu1 |
Al | 3.8-4.2 |
Cu | 0.7-1.1 |
Mg | 0.035-0.06 |
Pb | ≤0.003 |
Fe | ≤0.020 |
Cd | ≤0.003 |
Sn | ≤0.001 |
Si | ≤0.02 |
Ni | ≤0.001 |
Signup today to claim your Discount. Get Started before it's too late!
