Mono solar panel 285Watt | ||
Basic information | ||
Model | JS-30285M | |
Category | Mono | |
Electrical performance parameterï¼STCï¼ | ||
Maximum power-Pmax | Wp | 285 |
Power tolerance | % | 0ï½+3 |
Maximum Power Voltage-Vmp | V | 30 |
Maximum Operating Current-Imp | A | 9.50 |
Open circuit voltage-Voc | V | 36 |
Short-circuit current-Isc | A | 10.16 |
Maximum System Voltage-VDC | V | 1000 |
Solar Efficiency-ηm | % | ﹥19.5% |
Standard test condition | STC | Irradiance1000W/m2 ,ambient temperature25â ï¼Atmosric qualityAM1.5 |
Components & Mechanical Data | ||
Solar /span> | Mono siliconï¼156*156mm slice | |
of /span> | 60 pc | |
Size of Module | 1640*992*35 | |
Weight Per Piece | 18.1kg | |
Module glass | 3.2mmï¼High penetration, anti - reflection suede toughened glass. | |
Module backplane | 0.35mm white | |
Module frame | Silver and anodized aluminum alloy | |
Junction Box Type | PV-LH0702 | |
an> | 4mm2 | |
Temperature Coefficients | ||
Working temperature | ï¹£40ï½+85â | |
Temperature Coefficients of Voc(%)°C | -0.41%/â | |
Temperature Coefficients of Pm(%)°C | -0.32%/â | |
Temperature Coefficients of Im(%)°C | 0.055%/â | |
NOCT | 45â±2â |
Features of solar module:1.High efficiency solar with high transmission and textured glass are delivering high efficiency for modules;2.Bypass diode minimizes the power drop caused by shade;3.Tempered glass, EVA resin, and weatherproof film, plus aluminumframe for extended outdoor use;4.Modules independently tested to ensure conformance with certification and regulatory standards;5. Manufacturing facility certified to ISO9001 ISO14001 quality management system standards. Description of every parts:1.Junction Box in proof-water with TUV Certificate2.Solar Cable & Connector with TUV Certificate4.Toughed Glass: The glass is super white cloth grain of toughened glass , the thickness of 3.2mm , the solar spectral response range of wavelengths (320-1100 nm), light transmittance over 91% , Ultraviolet light radiation , light transmittance is not falling .Toughened glass is made of components can withstand 25 mm in diameter of hockey hit at a speed of 23 m/s.5.EVA: 0.5 mm thickness with high quality EVA film as sealant of solar and and the connection between the glass, TPT agent. With high light transmittance and anti-aging ability. Solar encapsulation of EVA film after curing performance requirements:Light transmittance is greater than 91% ; Crosslinking degree is during from 70 to 90% ; Peel strength (N/cm), glass/film is more than 30 ; TPT/film is more than 15 ; Temperature resistance is from - 40° C to 85° C.6.TPT BackSheet: the back of the solar panel, ageing resistance , corrosion resistance , resistance to ultraviolet radiation, airtight, etc. Basic requirements.7.Frame: aluminum alloy frame with high intensit , mechanical shock resistance ability.Strong, lightweight aluminum frame design with reinforced sealing and load hold to prevent freezing and warping, and stand against high wind.