GLOAZURE FABRICATED STEEL INSULATORS will safely support carrier pipes of any diameter in steel, cast iron or concrete casings and can, if required be desired to accurately centralize the pipe within the casings.
The INSULATOR is fabricated from high grade 14 SW gauge(2.0mm) steel and is either coated with high gradePVC to a thickness of approximately 15 mils(0.4mm) or zinc plated dependent upon customers requirement.Each skid is fixed to the INSULATOR by two welded studs.The skids will suit most types of applications and load requirement, and are available in two thicknesses, 19mm and 38mm.
When there is a large differential between carrier pipe and sleeve size, INSULATORS with skid resers are supplied to either accurately centralisethe pipe within the casing or radius to customers' requirements.The skid riser is fabricated from 10 SWG(3.2mm) steel and has supporting gussets on 600mm carrier pipe and over.
INSULATORS provide triple electrical insulation between the carrier pipe and sleeve: plus(a) Pipe Coating(b) High duty plastic coating of all steel components (where applicable)(c) Insulated skids.
GLOAZURE FABRICATED STEEL INSULATORS are available in any standard size up to 1050mm diameter and can be made to customers special requirements in greater diameters if required
For easy and speed of installation the INSULATORS come in two semi-circular halves which are clamped together by zinc plated or galvanized bolts which are supplied with each INSUALTOR.