UVECO Elevator UV LED Sterilizer Main

Product Features1. Stylish color and design to match the external environmentLuxurious colors of silver, gold, and blackcan be selected to match the external environment2. The world's only optimal irradiation angleTo increase the sterilization power, various researchesare conducted to select the optimal irradiation angleThe world's only product design structure that sterilizes close to the button3. Publicity effectProviding the advantages of sales promotionby securing the promotion effect and facility stability to attract customers4. Reasonable productProducts that add sterilization function to existing elevatorsExpensive elevator equipped with sterilization function, no replacement required5. Free resizingDepending on the size of the internal/external control panel,the upper/lower/left/right length can be cut and installed6. Exnt accessibilityImproving the difficulty of reading Braille for the visually impaired,which is a problem when applying the existing antibacterial film7. Exnt sterilization powerCompletion of self-sterilization power test and certified laboratory test8. StabilityIn-house UV safety test and certified laboratory test completed

Main Structure1. Main aluminum frame body2. PIR motion sensor3. motion display4. UV-C LEDUV Lamp5. Side aluminum frame

Working Principle1. UVeco Product Elevator internal installation2. Switch to sterilization state when motion is detected in standby state3. Switch to standby state after 30 seconds of sterilization4. If no motion is detected for 30 minutes, it switches to the sterilization state and sterilizes for 30 seconds

Advantages1. Can be installed by maintaining existing facilities2. Improvement of difficulty in reading Braille for the disabled when using antibacterial film3. Periodic sterilization4. Promotion to attract customers and secure facility stability5. Products that actually sterilize, not antibacterial

Sterilization Test: COVID19 Test Results and Sterilization Powertest light source: UVC LED - 275nm 10mW / same module as UVECO EV-1 UVC LEDtest distance: Distance between light source and virus 200mm(Within about 50mm distance between UVECO EV-1 and elevator button)test result: 30 sec – 90% / 90 sec – 99.9% sterilization immediately after exposure to light sourceUVECO EV-1: When the distance to the sterilization point is within 50mm,99.9% sterilization power is confirmed within 12.5 to 15 seconds.Our products repeat sterilization for at least 30 seconds when motion is detected.Sterilization test: Escherichia coli, Salmonella, Pseudomonas aeruginosa, Stalococcus aureustest light source: UVC LED - 275nm 10mW ( 12)test distance: Distance between light source and strain: within 150mm / Irradiation distance: 11mm / Product size: 150mm(W) X 330mm(L)test requirements: Sterilization confirmation / irradiation time (40 sec, 60 sec, 75 sec, 90 sec)by dividing the strain into 1 point and 2 pointtesting body: Point Engineering Co., Ltd. (UVON UVC LED manufacturer) / Daesung Electric Co., Ltd.test result: Immediately after light exposure45 sec – 98% / 60 sec –99.9% / 75 sec – 99.9% sterilization / 90 sec – 99.9% sterilizationSafety: UV irradiance measurement resultstest light source: UVC LED - 270nm 10mW ( 12) test distance: 10mm / 20mm / 30mm from the bottom of the button paneltest result: UV light emission 10mm (0.01 mJ/cm2) / 20mm (0.01 mJ/cm2) / 30mm (0.01 mJ/cm2)UVECO EV-1: UV illuminance is not measured from a distance of about 10mm(0.01 mJ/cm2 – ambient influence error value) from the front of the product.