1. Controlled from even the collection of fresh field latex from small holders, concentrated latex is pure and is one of the most clean raw material in terms of rubber. Fresh field latex is preserved with added chemicals and centrifuged to obtain a concentrated latex of 60% DRC (dry rubber contents). Ammonia is added during the process to enhance the preservation of latex but depending on specific requirements of the customer, various degrees are added to the concentrated latex
2. Good grades
60% HAL - 60 % DRC concentrated High Ammonia Latex 60% MAL - 60 % DRC concentrated Medium Ammonia Latex 60% LAL - 60 % DRC concentrated Low Ammonia Latex3. Packaging- Bulk/ Individually packed 205 kgdrums/ FlexiBag pouches specification for Latex concentrate | |||
Ammonia Percentage | |||
HA 60% | LA 60% | MA 60% | |
Total solids content (TSC) % by Weight | 61.50 min | 61.50 min | 61.50 min |
Dry Rubber Content (DRC) % by Weight | 60.00 min | 60.00 min | 60.00 min |
Non-rubber solid (%) | 2.00 max | 2.00 max | 2.00 max |
Amonia content (% on total weight ) | 0.60 min | 0.29 min | *MTO |
Amonia content (% on water se) | 1.60 max | 1.60 max | 1.60 max |
MST (Mechanical Stability Time at 55% T.SC) IN Seconds | 650 | 650 | 650 |
Volatile fatty acid (VFA) | 0.20 Max | 0.20 Max | *MTO |
Value | 10.50 Min | 10.50 Min | 10.50 Min |
KOH /div> | 1.00 Max | 1.00 Max | *MTO |
Magnesium content (on solids),ppm | 40+/- 10 | 40+/- 10 | *MTO |
Specific gravity 25*C | N/A | N/A | N/A |