Tapered Thread Sucker Rod
It is a sucker rod designed specially for the PCP pump, and the taper thread is designed according to the drill pipe thread, which is applied to a high anti-twist thread on the rod thread.
Its characteristics are:1.It can withstand greater torque.2.Because the pitch is large and the tooth is wide,fastening and unfastening is fast.3.Prevent thread loosening.
Sucker Rod for sale
Tapered Thread Sucker Rod
No. | Size | Rod Diameter(mm) | Threading | Length of finished product | |
1 | 7/8" | 22.23+0.2-0.41 | NC12 | 8000 | 30FT |
2 | 1" | 25.4+0.23-0.46 | NC16 | 7620 | 25FT |
3 | 1-1/8" | 28.58+0.25-0.51 | NC16 | 1000 | 2FT |
4 | 1-1/4 | 31.75+0.0-0.76 | NC16 | 2000 | 4FT |
5 | 1-1/2" | 38.1+0.0-0.0.76 | NC16 | 3000 | 6F |
Mechanical Properties Of Tapered Thread Sucker Rod |
| ||||||||||
Grade | Minimum Yield Strength (0.2% Residual Deformationï¼ | Minimum Tensile Strength | Maximum Tensile Strength | Elongation 200mm% | Reduction Of Area Z% | Surface Hardness HRC | Core Hardness HB | Fatigue Life | |||
| psi | MPa | psi | MPa | psi | MPa | â¥13 | â¥50 |
|
| â¥1.0X106 |
D | 85000 | 586 | 115000 | 793 | 140000 | 965 | â¥13 | â¥50 |
|
|
|
KD | 85000 | 590 | 115000 | 795 | 140000 | 965 | â¥13 | â¥50 |
|
|
|
HL | 115000 | 795 | 140000 | 965 | 173339 | 1195 | â¥13 | â¥45 |
|
|
|
HY | / | / | 140000 | 965 | 173339 | 1195 | / | / | â¥42 | â¥224 |
|
Tapered Thread Sucker Rod Torque Value
Torque SuckerRod | |||
Grade/Torque/Size | D | HL | HY |
7/8" | â¥1000 | â¥1200 | â¥1800 |
1" | â¥1500 | â¥1800 | â¥2200 |
1-1/8" | â¥2200 | â¥2900 | â¥3200 |
1-1/4" | â¥3000 | â¥3900 | â¥4300 |