Sorbent Ms

MС Sorbent has been produced since 2005. It is an optimal cost-effective solution for removing iron, manganese, hydrogen sulfide, stes, and oil products; it reduces the water color index without the use of chemical reagents. It is used both in pressure and free-flow systems, as a main or multi-layer ing medium. It is especially effective when used together with AС and MFU Sorbents.

This sorbent does not require any chemical reagents for regeneration. Periodic flushing with water or air-and-water mixture is necessary and sufficient.

Major Advantages:

• Long service life with low annual losses of less than 2%

• Not subjected to additional treatment with chemically-active coatings, based on manganese or other catalytically-active metal

• Wide range of operating temperatures from +0.5°С (works in cold northern water)

• Suitable for all types of oxidizing agents: ozone, sodium hypochlorite, hydrogen peroxide

• Suitable for hydrogen sulfide

• Suitable for less than 6.0

• No pre-adjustment of water required

• Pre-chlorination does not reduce the activity of MС Sorbent

• Increases water by up to 1.5–2.5 units depending on the initial water which ensures effective manganese removal

• Reduces the water color index by 70 to 80% during filtration (autocoagulation on the sorbent grains)

• Reduces the permanganate demand by 20 to 25%.