Introductionï¼
Advantage:
* Anti-skid performance
*Â Bright and rich color,marking is beautiful & safer driving
Consumption (Actual consumption depends on the roughness of pavement)
Â
Reference Table of Material Consumption |
 | Colorful Thermoplastic Anti-skid Paint |
Primer | 0.15kg/ã¡ |
Paint | 8kg/ã¡ |
Glass Beads | 0.4kg/ã¡ |
Aggregate | 3kg/ã¡ |
Â
Â
Technical Data:
·Curing time:â¤3minutes
·Compression strength:â¥8MPa
·Crack resistance in low temperature:In -10â no crack after three cycles
·Anti slide swing valve:â¥45BPN
·Resistance to deformation(60â,0.5kg/cm2)
Color:White/Yellow/Customize color
Â
Â
The matters needing to attention during the construction
1. The road surface should be dry during construction and keep the road clean
2. During the construction,the temperature should not be below 15 â,if the road surface is humidity construction is forbidden
3. When the paint is heated in the hot melt kettle,the temperature should be controlled at 180â to 220â,at the same time fully mixing4. After the primer completely dry,then to apply the paint