Timer, Counter KC-LCD-48-1R-230VAC

• Counter/Timer
• Adding/subtracting via 2 separate inputs
• Batch controller with 1 pre-selection
• Easy-to-read, 2-display with symbols for indicated pre-selection and output status
• Display range and preselection range from -999999 up to 999999 Overflow will be evaluated correctly up to 1 decade
• PNP and NPN sensors can be connected
• Degree of protection IP65 (front only)

Product Description

LCD batch controller with 1 relay output and 230 VAC supply voltage

General specifications Indicators/operating means Electrical specifications Input Output Compliance with standards and directives Ambient conditions Mechanical specifications

Pre-selection	single
Data storage	> 10 years, EEPROM
Programming	keypad-driven menu
Type	2- 6-digit LC display with leading sign
Display value	digit height 9 mm
Pre-selection	digit height 7 mm
Key interlock	via high potential at LOCK input
Decimal point	0 to max 5 fractional digits
Scale factor	0.0001 ... 99.9999
Reset	manually or external
Fusing	T 0.1 A
Operating voltage	230 V AC
Power consumption	max. 6.5 VA
Connection	Counter inputs: A and B Control/reset inputs: LOCK, RESET
td>
	High	3.5 ... 30 V DC
	Low	0 ... 2 V DC
Counting frequency	30 Hz / 5 kHz
Minimum pulse duration	Control/reset inputs: static / 1 ms
Impedance	10 kOhm
Count modes
	Pulse counter	Counting with counting direction (), difference counting (), up/down counting (quad),
	Timer	Time measurement via GATE input (FrErun), counter input A: Start, counter input B: Stop (InpA.InpB.), counter input B: Start/Stop (InpB.InpB.),
Relay	changeover /td>
	Switching voltage	max. 250 V AC / 110 V DC
	Switching current	max. 3 A AC/DC, min. 30 mA DC,
	Switching power	max. 750 VA / 90 W
	Mechanical life	2 x 107 switching cycles
	Electrical life	5 x 104 cycles at 3 A
	Response time	< 15 ms pulse counter < 10 ms time counter
Sensor supply	14.4 ... 27.6 V DC max. 50 mA at 230 VAC
Directive conformity
	Low Voltage Directive 2006/95/EC	EN 61010-1:2001, protection class: 2
	EMC Directive 2004/108/EC	EN 61000-6-2:2005, EN 50295:1999
Standard conformity
	Emitted interference	DIN EN 55011:2009, Class B
	Mech. capacity	EN 60068-2-6:2008 10 &hellip, 55 Hz / 1 mm / XYZ 30 min in each direction
	Shock and impact resistance	EN 60068-2-27:1995 100 G / 2 ms / XYZ 3 times in each direction
Ambient temperature	-10 ... 50 °C (14 ... 122 °F)
Storage temperature	-25 ... 75 °C (-13 ... 167 °F)
Relative humidity	&le, 93 % at 40 °C (noncondensing)
Altitude	0 ... 2000 m
Pollution degree	2
Degree of protection	IP65 (front)
Mass	approx. 230 g
Dimensions	48 mm x 48 mm x 109.8 mm