AS-Interface EMERGENCY STOP button VAA-2E-F85A-S-V1

• 2-channel, compelled connected
• Outwit-proof according to ISO 13850/EN 418
• TÃœV-approval for system components is available
• Biased actuator for self-monitoring
• EMERGENCY STOP unlocking by turning or pulling
• M12 plug connection

This AS-Interface emergency shutoff button is a two-channel, positively driven allowing the operation of personnel protection systems when used according to specification along with an AS-Interface safety monitor. It occupies one complete address in the AS-Interface strand. When the safety monitor is properly configured, up to EN 954-1 Category 4 and IEC 61508 SIL 3 can be achieved. For mounting, the housing of this AS-Interface emergency shutoff button can be screwed directly onto the machine. Product Description

AS-Interface EMERGENCY STOP button

General specifications Functional safety related parameters Electrical specifications Input Directive conformity Standard conformity Programming instructions Ambient conditions Mechanical specifications

Slave type	Safety-Slave
AS-Interface specification	V2.1
Required master specification	&ge, V2.0
UL File /td>	E198304
MTTFd	200 a
B10d	1 E+5
Rated operating voltage	26.5 ... 31.6 V from AS-Interface
Rated operating current	&le, 25 mA
Protection class	III
Insulation resistance	min. 100 M&Omega,
Type	2 NC Safety function by positive opening in accordance with IEC/EN 60947-5-1 Reset by pulling
Supply	from AS-Interface
Electromagnetic compatibility
	Directive 2014/30/EU	EN 62026-2:2013
Electromagnetic compatibility	EN 62026-2:2013
Degree of protection	EN 60529:2000
Electrical safety	EN 60947-5-5:1997+A1:2005
AS-Interface	EN 62026-2:2013
Functional safety	EN 62061:2005 EN 61508 Parts 1-7:2010 NFPA 79:2007 EN 60204-1:2006
Profile	S-0.B.E
IO code	0
ID code	B
ID1 code	F
ID2 code	E
Data bits (function via AS-Interface)	input output
	D0	dyn. safety code 1 -
	D1	dyn. safety code 1 -
	D2	dyn. safety code 2 -
	D3	dyn. safety code 2 -
Parameter bits (programmable via AS-i)	function
	P0	not used
	P1	not used
	P2	not used
	P3	not used
Ambient temperature	-25 ... 55 °C (-13 ... 131 °F) (no freezing)
Storage temperature	-40 ... 70 °C (-40 ... 158 °F)
Relative humidity	40 ... 85 % , noncondensing
Operating force	Push: 32 N Pull: 21 N Turn: 0.27 Nm Minimum for positive opening operation: 60 Nm
Operating distance	for positive opening operation: min. 4 mm maximal: 4.5 mm
Degree of protection	IP65 Module: IP20
Connection	M12 round connector
Material
	Housing	PC
Mass	195 g
Life span	> 250,000 switching operations