This model is table-gantry structure,auto ignitionï¼ide,dual drive.It can cut any figure on various metal plate, Capacitive or Arc voltage height controller device can be configurated for flame/plasma/flame&plasma.
Cross Beam Length(X axis) | 2m (can be lengthened according to user's demand) | |
Longitudinal Rail Length(Y axis) | 3m (Rail can be lengthened according to user's demand) | |
Effective Cutting Width (X axis) | 1.5m | |
Effective Cutting Length (Y axis) | 2.5m | |
Cutting Mode | Flame/Plasma/Both Flame&Plasma | |
Drive Mode | Bilateral-side | |
Drive Method | Rack and pinion drive for X and Y axes | |
Flame Cutting Thickness | 5-200mm | |
Plasma Cutting Thickness | 1-60mm (depend on plasma power source) | |
Cutting Speed | 0-6000mm per minute | |
Moving Precision | 0.01mm per step | |
Power Source(option) | 220V 50Hz 500-1000W | |
Nesting Software (option) | INTERGNPS, FASTCAM | |
Cutting Gas | Acetylene, Propane&Oxygen | |
Plasma Gas | Pressed air, Oxygen, N2 | |
Torch Height Control system | CHC600 | Auto Capacitive height control for flame cutting |
330 | Auto Arc voltage height control for plasma cutting |