Atlas Copco Oil-Air Sepatator Filter 1614905600 Replacemenrt

Working Time >4000 H

Initial Pressure Difference < 0.02 MPa

Residual Oil Amount < 3PPM

Model NO.:Â 1614 9056 00, 2906 0565 00

Standard Component:Â Standard Component

Category:Â Oil Separator

Micro:Â 0.1um

Separation Mode:Â Filter Type

Pressure:Â Low Pressure

Trademark:Qingdao Futai

Specification:Â 84*36*36

HS Code:Â

Customized:Â Non-Customized

Material:Â Fiber Glass

Object:Â Fertilizer

Installation:Â Vertical

Distillation Equipment Type:Â Steam Distillation Equipment

Application:Â Industry

Transport Package:Â Neutral Packing or Customized

Product Description

Replacement Atlas Copco compressor air oil separatorÂ

1.Filtering precision:0. 1 Micron . 2.Oil contained in compressed is below 3ppM. 3.Filtration efficiency:99.99%. 4.Service life is approximately 4000h. 5.Initial pressure differential less than 0.02Mpa. 6.Filter l separator is made by the thin fiberglass,which imported from Germany HV company. 7. Structure: The outer is metal nets, inside is high densite fiber glass and gas separation material, most inside is the metal nets, flange connection with sealing ring.

Packing Detail: 1. Small carton boxes for each separator, then big thick carton boxes for several separators. 2. Neutral packing or as customer require

The consequences for air oil separator filter extended use: 1. Separation efficiency is poor, resulting in increased fuel consumption, increased operating costs, lack of oil serious may even lead to host failure; 2. Compressed air outlet oil content increases, affecting the back-end purification equipment, resulting in gas equipment can not work; 3. After the blockage increases, leading to the actual unit discharge pressure increases, increasing energy consumption; 4. Oil gas separation filter run time is too long , the glass fiber material may falling into the oil, resulting in shortened life of the oil filter.