| Preheating zones | 8 |
| Preheating quanlity | 2800mm |
| Mesh belt width | 400mm |
| Conveyor speed range | 0~1800mm/min |
| Temp controlling | RKC module |
Reflow Solder Type and Overseas service center available After-sales Service Provided Wave Soldering Machine
Introduction:
1.The heating system adopt the Swedish nickel heater with efficiency and energy-saving. The peak wave length of the radiation power is 4UM with curved surface reflector to the rising temperature speed, improve the thermal efficiency. And the special forced-air circulation system make PCB and the component heated uniform and eliminate the "shadow effect" completely .2.Using special high temperature resistant protection system in heating preservation system and special iron in furnace .
3.Using imported Taiwan SanYue long axis of high temperature fan motor and W shaped heat pipe, Model design, no noise, shockless and easy for maintenance .
4.Whole oven are porous aluminum transfer the hot air to guarantee the hot air evenly to the PCB .the whole top oven fixtures can open completely so that easy to clean the oven inside .
5.The transmission system use STK adjustable speed motor imported from Taiwan matched with the 1:150 turbine reducer can running smooth ,speed range can be arrived at 0-1000mm/min.
6. Independent wheel structure support and match stainless belt to make the running smoothly and the speed precision is up to ±20 mm/min .
7.Special stainless belt: durable and wear-resistant, not easy to deform and long life.
8.It adopts imported thermostat control which owns fuzzy control and PID intelligent precision control system.It can fast response the changes in external heat and ensure more temperature balanced by PID intelligent operation and automatic control heating .
9. Using thermocouple imported from Taiwan by each temperature zone, it can fast and sensitive induct the changes in each temperature zone, transfer and control timely, compensate the temperature balance in each zone .
10. Special SSR solid state relay matched with dedicated radiator improve the heat efficiency greatly and prolong the lifetime effectively. No output and fuzzy control function by thermostat, can monitoring the changes of outside temperature and calorific value, controlling the heating device by minimum pulse, ensuring the high precision of the temperature control & the uniform temperature in internal and the length ,direction, temperature distribution, all of these meet IPC standards .
Specification:
Model | JAGUAR A6 | |
Heating System | of heating zones | UP 6/BOTTOM6 |
of cooling zones | 1 | |
Length of heating zones | 2400MM | |
Heating mode | Up:hot air; bottom: IR | |
Cooling Mode | Force air | |
Conveyor System | Max. Width of PCB | 350mm |
Mesh belt width | 400mm | |
Transmission Direction | L→R(or R→L) | |
Transmission Net Height | 880±20mm | |
Transmission type | Mesh | |
Conveyor speed | 0-1000mm/min | |
Fixed rail side | Front rail fixed(option:rear rail fixed) | |
Control system | Power supply | 5 ase 380V 50/60Hz |
Total power | 28kw | |
Starting power | 24kw | |
Normal power consumption | 4KW | |
Warming time | About 20 mins | |
Temp. setting range | Room temperature-300℃ | |
Temp. control method | PID close loop control & SSR driving | |
Temp. control precision | ±1℃ | |
Temp. deviation on PCB | ±2℃ | |
Data storage | Process Data and status storage (80 GB) | |
Nozzle plate | Aluminum Alloy Plate | |
Abnormal Alarm | Abnormal temp. (extra-high/extra-low temp.) | |
Board dropped alarm | Tower light:yellow-warming, Green-normal, Red-abnormal | |
General | Dimension(L*W*H) | 3500×700×1320mm |
Weight | 600KG | |
Color | Computer gray | |
JAGUAR Automation - one of the well-known lead-free smt machines manufacturers in China, Founded in 2009, headquartered in Shenzhen. JAGUAR has been committed to lead-free equipments research and development, and manufacturing lead-free reflow oven, wave soldering machines and other lead-free electronic devices since foundation. Currently has the R8 series of high-end dual-track lead-free reflow soldering, the F8 series of lead-free reflow ovens, A8 Series of lead-free reflow solder ovens and N series wave soldering equipments.
1, our service tenet: fast, thoughtful and thorough2, service goals: service quality to win the user satisfaction3. the service efficiency: the warranty period or the warranty as equipment failure, the supplier in the receipt of the notification, the maintenance personnel in one hour to respone.4, service principle: product warranty period of 12 months, in the guarantee period the supplier will free maintenance and replacement of quality caused by he damaged parts.
Tony wang
Shenzhen Jaguar Automation Equipment Co., LtdTEL:+8FAX:+8MOBILE/WECHAT/> QQ:ADD:Building A07,hongtian jinyuan industrial zone,hongtian road, xinqiao street, shenzhen,China
Signup today to claim your Discount. Get Started before it's too late!
