Chip:epileds
Normally we can send out with 7 days, if you need big quantity,
please send us message to check stocking and lead time.
If you need to customize also send us message.
Warm tips:
in order to make our products play the best performance and reduce customer failure in the use of products, please note:
1) During the whole process of use, all people who are in direct with UVLED should take measures to prevent and eliminate static electricity, and do not touch the UV light emitting diode directly with their hands.
2) When welding, attention should be paid to the welding time and temperature, and the positive and negative polarities should be distinguished.
3) Electrical parameters such as current and voltage should not exceed the rated values.
Attention should be paid to welding high-power UV LED:
1) The welding time should not exceed 3S;
2) Welding temperature should be less than 260 degrees.
3) Reflow welding is allowed only once.
4) When welding, distinguish positive and negative polarity, and avoid lens to avoid damage to lens.
5) Do a good job of heat dissipation measures, especially high-power UVLED as far as possible to ensure adequate radiator area
6) In order to prolong the lifetime of ultraviolet light emitting diodes, it is recommended to use a stable constant current driving current or IC instead of a constant voltage driving power supply or IC.
Mike Zhao,
/mike8
facebook: mikezhao188
Twitter:mikezhao188
QQ:
Signup today to claim your Discount. Get Started before it's too late!
