Commerical Grade Name | Elgiloy |
Surface Finish | Cold-Finish |
Material | Cobalt chromium Alloy |
Specifications | ASTM F1058-08 Grade 1 |
Certificate | ISO9001:2015 , RoHs |
Condition | Cold Rolling |
Dimensions | Thick 0.05 to 1.8mm |
Surface | Bright |
Melting Process | VIM+ESR Melting |
Tensile Strength,MPa | 1850 |
Elgiloy is a cobalt-chromium-nickel (Co-Cr-Ni) nox . It exhibits good mechanical properties, high strength, and ductility, good fatigue life, and can be age-hardened. Elgiloy is ideal for manufacturing custom springs and custom metal stampings for applications that require high corrosion resistance and/or low relaxation at temperatures up to 600 F (316 C).
Use in Springs ,Seal components, Medical devices, Components for watches, Aerospace applications, Petro-chemical applications, Marine engineering.
The alloy is first melted using Vacuum Induction Melting (VIM) techniques. A secondary melt operation, Electro Slag Remelt (ESR), is then employed to further remove impurities and improve overall homogeneity.
Commercial Grade Name | Elgiloy Alloy |
Material | Cobalt Chromium alloy |
Specifications | ASTM F1058-08 Alloy Grade 1 |
Surface-Finish | Cold-Finish |
Edge Finish | No Damage |
TOL.Thick | +/-0.03mm |
TOL.Width | +/-0.1mm |
I.D. Value | 200-500mm (Paper Coil I.D.) |
O.D.Value | Base on Coil Weight |
Applications | Elgiloy is highly resistant to sulfide stress corrosion cracking and as a result is the alloy of choice in the most demanding sour environments. |
C,Max | 0.15 |
P,Max | 0.015 |
S,Max | 0.015 |
Si,Max | 1.2 |
Mn | 1.5 to 2.5 |
Mo | 6.0 to 8.0 |
Ni | 14.0 to 16.0 |
Cr | 19.0 to 21.0 |
Co | 39.0 to 41.0 |
Fe | Bal. |
Be content 0.10 (Max)
sical Properties
Density , G/Cm3 | 8.30 |
Melting Point, C | 1427 |
Modulus of Elasticity , GPa | 190 |
Modulus of Rigidity ,GPa | 77.2 |
Thermal Expansion, µm/m C , 20-300 C | 15.2 |
Electrical Resistivity µ ohm-cm | 99.6 |
Thermal conductivity, W/mK | 12.5 |
Mechanical Properties
Material | Conditions | Size/mm | Tensile Strength Rm/MPa | Elongation A,% |
Strip Material | Cold-Rolled | 0.1 to 2.5 | 1150 to 1895 | 3 Min |
Soild Material | Cold-Drawn | 0.2 to 3.5 | 1515 to 1795 | ... |
Notes:
SPECIFICATION: ASTM F1058-08 Alloy Grade 1
1. Mechanical Property can be improve with Cold Worked & Aged
2. Rod forms fully compliance with chemical component
3. Annealed possible for ip
IMPORTANT NOTICE
Chemical composition,sical and Mechanical properties will be engineered according to specific customer requirements.Therefore chemical composition,sical and mechanical properties might be different to values listed in this document.Information about product characteristics or applicability of materials are shown only for informative purposes
Elgiloy Alloy are available in many shapes and dimensions,supplying semi-finished products in forms of Strip,plate & Rods.The samples are big enough (typically about 200mm in length for strip or plate) to get an understanding of the material characteristics, meanwhile custom-made sample order available with small quantity accepted !
30% T/T in advance ,balance before shippment.
Mr. Paul (Foreign Trade Manager)WeChat:8kel