ZHRS600B-2F-380 is a precision heat shrinkable tube heating machine,designed for mass production.It can work for 24 hours in a row,process special products.The heating machine and the conveyer are used together to realize the precise heating of the heat shrinkable tube without damaging the lly adjusting the speed, the speed of the conveyor belt is kept uniform. The vertical distance and the parallel distance of the heating port to the conveyor belt can be adjusted, and the heat shrinkable tube of different size components can be heated.It is suitable for users with accurate heating requirements for an also be applied to heat high temperature Teflon heat shrinkable tubes or large diameter and long heat shrinkable tubes.
Characteristics:
One side or double side heating is optional
According to the heating requirements of the heat shrinkable tube, it is free to choose one side or two side heating.
The heating zone width, heating distance and left and right position can be adjusted.Accurate heating does not hurt the >
The vertical distance and parallel distance of the heating port to the conveyor belt can be adjusted, and the heat shrinkable tube of different size components can be heated,save energy as much as possible and ensure the hurt.
Heat insulation of heating machine
Double insulation, strong machine shell makes the machine safe and reliable, and can work in high temperature for a long time.
LCD
Deviced friendly man-machine interface, menu operation of liquid crystal Chinese characters,simple and convenient manipulation,Real-time display of work status.
Open machine presupposition function
The machine can set the speed of the fan, the output temperature, the working time, etc.
Temperature control system (room temperature ~460 â)
A digital stepless mediation method is adopted to control the power output, control the temperature, stabilize the output, and control the temperature accuracy by + 2 degrees Celsius.
Fan delay function
In order to protect the heating core and prolong the service life of the heating core, the machine has a time delay function of downtime and blow drying. After the machine stops working, the hair dryer will blow off for a minute before it can be shut down.
High heat exchange efficiency
Ingenious design of wind tunnel let the air uniform through the inside and outside of the helical heating ange near 100%,the loss of wind pressure is less.The heating core of the heater is designed to use the lower surface power density, and the heating temperature in the unit area is low, so the electric heat g service life.
Parameter memory function
The power, temperature, fan speed and other parameters of the hot air fan have memory function.
Air flow regulating valve
The air inlet of the blower is equipped with a manual air volume regulating valve, and the air volume can be adjusted according to the needs.
Security
It has overheating overload protection, power cut protection device, emergency stop switch, se sequence protection, fully guarantee the safety of the equipment,do not produce exhaust gas, and meet the environmental protection,can keep operating 24 hours a day without stopping all year round.
Selection of assembly auxiliary conveyor
This machine is work in with auxiliary conveyors, and can be applied to heat shrinkable tubes with arbitrary specifications.
Classification | Item | Parameter |
size | Conveyor (L x W x H) | selective assembling |
Heating machine (L x W x H) | See picture | |
Maximum iameter | <60mm | |
Maximum heating casing length | <90mm | |
Heating area | 400mm | |
Cooling zone | 200mm | |
Maximum transmission width | 550mm | |
Maximum transmission height | <90mm | |
Conveyor belt
| Texture of material | Teflon |
speed | 1~3m/min | |
The power of the motor | 25Wï¼Stepless speed regulationï¼ | |
heating
| Heating mode | Hot air |
Heating pipe power | 6000Wï¼2 sets | |
Power supply for heating machine | Power demand | 380V Three se four an lang="EN-US"> 50HZ |
Power | 12.3KW |