High output 300-350kg/h recycling plastic granules making machine ASL- 350

1.Machine application

The scope of application of foam granulator and waste foam granulator is widely used in the disposal of EPS, XPS, EPP, EPE, PU and other materials. It is widely used in waste foam scrap, packaging foam, disposable lunch box, polyurethane insulation board, extruded board , EPC and rock wool board, foam box, insulation board, KT board, heating materials and other recycling industry. For the processing of waste fast food boxes, home appliances packaging EPS foam (styrofoam), so that into a renewable PS pellets. This kind of recycled plastic can make all kinds of stationery, toys and electrical shell.

2.Machine features

1. The main and auxiliary screw barrel are imported high-strength high-quality carbon structural steel manufacturing, durable.

2. SJ220 type using cone screw barrel, to speed up the feed rate, greatly improving production and quality.

3. Using the main and auxiliary machine supporting the production, heating temperature stability, effectively improve the molecular structure of materials, enhance permeability, significantly improve the quality of particles

4.The unit mainly by the broken dry cleaning machine, extruder, automatic traction granulator composition. Automatic feeding, automatic temperature control, automatic dust removal, impurity, automatic filter, the production process without pollution.

5. Foam granulation unit is the foam by crushing - plasticizing, pumping - granulation and other processes, the mechanical properties of stable and reliable, 100-300 kg per hour.

3.Machine operation

1. Check the screw is loose, the spindle rotation is flexible.

2. The correct installation of the motor and its e motor uses three-se 380V heatsink with 220V current.

3,.Make the body outside the good grounding protection.

4. check the test machine spindle steering is correct.

5.The heating plate preheat to the barrel shell melting foam, and pay attention to each time before the start of the extruder must be made up and down the barrel of raw materials completely melt, for rotating round flexible. Because of the residual raw material lumps, it is recommended to use the torch to strengthen the upper and lower head preheat.

6.Flexible control of the length of water into the water, depending on the temperature, the water temperature is different, the water will be about 1.1-1.7M by the water, so that the strip is not broken broken, cut off after the non-stick.

7.Observe the material color, shape, flexible control of the heating power supply for the situation.

8. The raw materials in the gray, soil and other impurities more, you can add 60 mesh mesh in the screen before the screen, 1-3 layers of the screen to ensure that the color of particles, purity.

4.Technical parameters

5.tos of plastic granules