HC110 110Ton 1100KN Clamping Force General Purpose Plastic Injection Molding Machine
General Purpose Plastic Injection Molding Machine
Servo Energy-saving Plastic Injection Molding Machine
Injection molding machine
Specifications | Unit | HC110 | ||
INJECTION UNIT |
| A | B | C |
Screw diameter | mm | 34 | 36 | 40 |
Screw L/D ratio | L/D | 23.1 | 21.8 | 19.6 |
Theoretical shot volume | cm3 | 167 | 188 | 232 |
Shot weight(PS) | g | 152 | 171 | 211 |
Injection rate | cm3/s | 84.3 | 94.5 | 116.7 |
Injection pressure | Mpa | 206 | 183 | 149 |
Max. screw speed | rpm | 210 | ||
CLAMPING UNIT |
|
| ||
Clamping force | kN | 1100 | ||
Opening stroke | mm | 345 | ||
Distance between tie-bars | mm | 370 x 370 | ||
Max. mold height | mm | 380 | ||
Min. mold height | mm | 150 | ||
Ejector stroke | mm | 100 | ||
Ejector force | kN | 33 | ||
OTHERS |
|
| ||
Drive power | kW | 13 | ||
Heating capacity | kW | 7.5 | ||
Machine dimensions | m | 4.3 x 1.2 x 1.75 | ||
Machine weight | t | 3.1 | ||
Oil tank capacity | L | 170 |