HC170 170Ton 1700KN Clamping Force General Purpose Plastic Injection Molding Machine
General Purpose Plastic Injection Molding Machine
Servo Energy-saving Plastic Injection Molding Machine
Injection molding machine
Specifications | Unit | HC170 | ||
INJECTION UNIT |
| A | B | C |
Screw diameter | mm | 42 | 45 | 50 |
Screw L/D ratio | L/D | 23.4 | 21.8 | 20.3 |
Theoretical shot volume | cm3 | 312 | 358 | 442 |
Shot weight(PS) | g | 284 | 326 | 402 |
Injection rate | cm3/s | 131.3 | 150.7 | 171.4 |
Injection pressure | Mpa | 170 | 148 | 120 |
Max. screw speed | rpm | 200 | ||
CLAMPING UNIT |
|
| ||
Clamping force | kN | 1700 | ||
Opening stroke | mm | 435 | ||
Distance between tie-bars | mm | 470 x 470 | ||
Max. mold height | mm | 520 | ||
Min. mold height | mm | 180 | ||
Ejector stroke | mm | 135 | ||
Ejector force | kN | 46 | ||
OTHERS |
|
| ||
Drive power | kW | 18.5 | ||
Heating capacity | kW | 9.3 | ||
Machine dimensions | m | 5 x 1.3 x 2 | ||
Machine weight | t | 4.6 | ||
Oil tank capacity | L | 250 |