Operating Frequency | 2.4GHz |
Interface | Uart |
Main Chipset | TI CC2640R2 |
Connector | PCB/IPEX |
Power Voltage | 1.8-3.8V |
The Bluetooth LE modules can work in bridge mode (transparent transmission mode) . After being started, the module can broadcast automatically. Smart with specific application running will scan and pair with it. When connection is successful, the smart can monitor and control the module through Bluetooth protocol.In bridge mode, user MCU can communicate with the mobile device bi-directionally through module's UART. Users can also manage and control certain communication parameters through specific serial port AT commands. The detailed meaning of the user data is defined by the up-application. Mobile devices can write the module through the APP. And the data written will be sent to the user MCU through serial ports. Then the module will transmit the data package from user MCU to the mobile devices automatically. Under the development in this mode, the user needs to undertake the work of code design for master CPU, and the code design of APP for smart mobile terminals.
Easy to use, no need of any experience of Bluetooth protocol stack application;
UART design for user interface, full-duplex bi-directional communication, and supporting the minimum baud rate of 4800 bps;
Default connection interval of 20ms, which makes quick connection;Supporting module soft reset by AT command, and access to the MAC address;Supporting the adjustment of Bluetooth connection interval by AT command, and the control of different forwarding rates (dynamic power adjustment);Supporting the adjustment of the transmission power by AT command, the change of broadcasting interval, the customization of broadcasting data, the customization of equipment UDID, the setting of data delay (preparation time of user MCU serial port receiving), the change of the serial port baud rate, and the change of the module names (all settings can be saved after power-off);The length of the UART data packets can be any below or equal to the arbitrary length of 200 byte (large packet automatic distribution);High-speed transparent transmission rate maximum to 4 K/s and the stable rate to be 2.5 K/s to 2.8 K/s (IO5, IO6);Supporting the change of module name by APP, the change of UART baud rate and product UDID, the user-defining of broadcasting contents and cycles (all settings can be saved after power-off);Supporting the remote reset of module by APP, and the setting of transmission power;Supporting the adjustment of Bluetooth connection interval by APP but the setting cannot be saved after power-off (dynamic power adjustment);Supporting the connection status and the flexible configuration of broadcasting status prompt pin / general IO;
Supporting battery power information reading and prompt, able to auto upload (notification of remaining battery power)
Supporting the deep recovery modes and remote shutdown
& Consumer Application
Tablet/Smart TV/IPTV/OTT/IPC/AI Speaker/Security System /Toys
& Commercial And OA Application
Printer/POS Terminal/Projector/Meeting System/Interactive WhiteBoard/Education Equipment
& Industrial And Vehical Application
Instruments/Vehicle before-assembly/ afterassembly/High-speed train/Charging pile
& Medical Application
Medical equipments/Medical instruments& Other Consumer Electronic Products