Jacketed Gate Valve – Suitable for high temperature, pressure, abrasive slurry application.
Jacketed Gate Valve Manufacturer, Hot Thermal Oil, Steam Jacketed Valve Exporter, Rising Stem Gate Valve with Jacketed, Molten Sulfur Jacketed Valve Stockist, Jacketed Bitumen Gate Valve Suppliers, Jacketed Nahalene Gate Valve Stockist, Jacketed Gate Valves Exporter, Dowtherm Jacketed Flanged End Gate Valve.Nivz valves manufacture and exporting Rising Stem, Bolted Bonnet, OS & Y Type Jacketed Gate Valve with Flexible Wedge Gate and Seat Rings seal-welded or integral design. All Jacketed Gate Valve single piece heavy duty rugged body heat treated casting as request standard materials.
To get better performance against high temperature all gland packing use die molded pure grate / grafoil rings and inconel te asbestos cut braided rings.
All standard range of Jacketed Gate Valve manufacture with stainless steel 304/316/316l spiral wound gasket with grate filled or grate tensed gasket depends on flow media pressure and temperature.
Nivz Valves a leading exporter and manufacturer of various application suitable Full or Partial Half Jacketed Gate Valve with fully steam or hot oil jacketed.
Model Series JKGT15/30 each Jacketed Gate Valves design as per API 600/ API 603 / API 6D Standard.
Jacketed Gate Valve largely use to sustain process media temperature during process to keep fluids at a lower viscosity to operate valve smoothly.
Each Full Jacketed Gate Valve body construction replace by adding minimum one size higher flanges to achieve proper tighten space of bolt and nut.
As example: for Full Jacketed Gate Valve Size DN50 x DN80 (2†x 3â€), Jacketed Ball Valve has the nominal bore of DN50 (2†– 50MM) and the flange size DN80 (3†– 80MM), which allows enough space for bolting clearance after jacket fabricated (welded) on modified valve body. These types of jacketed gate valve termed as a Full Jacketed Gate Valve.
We are manufacturer of Full Jacketed Gate Valve in size from DN50 x DN 80 (2″ X 3″) to DN150 x DN250 (6″ x10″) and for Partial Half Jacketed Gate Valve DN50 (2″) to DN600 (24″)
Steam and Hot Oil Jacketed Gate Valves mostly use in application of Polymer, Bitumen, Liquid Aslt, Coal tar, Lactum, Highly Viscous Media, Molten Sulfur or Sulr. All Jacketed Gate Valves have standard Inlet & Outlet connection for Steam or Hot Oil circulation. Jacket connection can be Threaded (BSP / NPT Female) or Flanged End.
Jacketed Gate Valve available with body material CS-WCB, LTCS-LCC/LCB, SS304/316/304L/316L-CF8/CF8M/CF3/CF3M, Alloy20-CN7M, NACE MR-0175, Duplex Steel, Super Duplex Steel & Hastelloy C22/C276 Grade.
Different combination of jacketed gate valve body – bonnet material and jacket material to meet project process requirement. Various options are as per below:
Carbon Steel Body & Bonnet – Carbon Steel Jacket
Stainless Steel Body & Bonnet – Carbon Steel Jacket
Stainless Steel Body & Bonnet – Stainless Steel Jacket
Duplex Steel Body & Bonnet – Carbon Steel Jacket
Duplex Steel Body & Bonnet – Stainless Steel Jacket
Alloy 20 Body & Bonnet – Carbon Steel Jacket
Alloy 20 Body & Bonnet – Stainless Steel Jacket
Hastelloy C22 / C276 Body & Bonnet – Carbon Steel Jacket
Hastelloy C22 / C276 Body & Bonnet – Stainless Steel Jacket
More customized requirement also fulfill by us.
Nivz all full jacketed gate valve face to face distance we provide as per ANSI/ASME B 16.10 standard of oversize flange size which facilitate to replace in future with any standard non jacketed gate valve also.
Our supplied Jacketed Valve satisfactory performing at present in a country Kingdom of Saudi Arabia, Brazil, Israel, United Arab Emirates – Dubai, Turkey, Australia, Africa, Egypt, United States of America, Oman, Malaysia, Jordan, USA – America, Malaysia, lippines, Vietnam, Singapore, India, etc.
Signup today to claim your Discount. Get Started before it's too late!
