Carbonated Soft Drinks Production s Bottle Gas Water Filling Machine
The machine is mainly used in the beverage filling operations,The three functions of bottle washing ,filling and capping are composed in one body of the machine.The whole process is antomatic.The machines is used to fill carbonated drink in bottles made of polyester and plastics ,The machin is convenient to adjust the machine to fill various types of bottles ,The filling operation is faster and more stable due to the isobar filling operation of the new type is adopted,The output and benefit of the machine is higher than the machines with same specifications,The advanced OMRON programmed controller(PLC)is adopted to control the machine running antomatically,air conveyor system is adopted in bottle entry section and belt conveyor system is adopted in bottle exit section,which can adjust speed and coordinated with transducer of the main machine to make the operations of moving bottle forward steadily and reliably,It is convenient to operate with higher antomation due to every parts of the machine is inspected to run with toelectric detector,The machine is idea-preferred equipment for beverage makers.
1. Using high-precision mechanical filling valve, with cylinder liquid level and the back pressure controlled by a variablenal. Fast, stable, accurate, to be vacuum one at a time.2. Stainless steel plunger and mechanical stirring glandtype magnetic reasonable cap to ensure that the gland is healthy and reliable. Hopper and the cap taking- cover, capping transmitted by magnetic. Thecapping is reliable and automatic unloading, reducing the rate of broken bottles.
SPECIFICATIONS FOR DCGF32-32-10 Carbonated Drinks Filling Machine | |||
Washing heads | 32 (diameter:Ï720) | Bottle size | 330-2000ml, by order |
Filling valve heads | 32 (diameter:Ï720) | Capacity | 3000-3500B(500ml) |
Capping heads | 10 (diameter:Ï240) | Aseptic air consumption | 0.4m3/min(0.4ï½0.6Mpa) |
Applicable bottle | bottle height: 150ï½350mm | CO2 consumption | 180g/100L |
Diameter: Φ52ï½Î¦84mm | Vacuum pump | 0.15m3/h | |
Operating voltage AC | 380V | Blowing | 0.6m3/h |
Controling voltage DC | 24V | ||
Power | |||
Main motor | 2.2 KW | Filling machine | 0.55KW |
Spray pump | 0.37KW | Vacuum motor | 1.1KW |
Hopper motor | 0 .18KW | Electric Chain motor | 0.37KW |
Overall dimension (LÃWÃHï¼ | Tell Us What You NEED
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.
Ok
|