Battery Capacity Analyzer Outan>In order to truly and accurately grasp the actual capacity of storage battery pack, according to the national standard, electric power and communication industry standard, we must carry out the full-capacity check discharge test for storage battery pack. In the discharge process, it carries on rated constant-current discharge (this value is corresponding with capacity, specifically refer to industry standards), and real-time measurement for each single battery's voltage. If the voltage of any one battery is lower than the rated value, it stops discharging. The capacity has been released is the actual capacity of battery pack, which can judge the storage battery performance (for more accurately calculating the actual battery capacity, it's suggested we do conversion according to environment temperature during testing).Characteristic:
Technical Parameter:
Type(optional) | FLD-F 220/30 | FLD-F 220/50 | FLD-F 220/60 | FLD-F 110/30 | FLD-F 110/60 | FLD-F 110/80 | FLD-F 110/100 | FLD-F 48/50 | FLD-F 48/100 | FLD-F 48/150 | FLD-F 24/50 | FLD-F 24/100 | FLD-F 24/150 |
Applied Battery Pack | 220V | 110V | 48V | 24V | |||||||||
Note: UPS storage battery and other special voltage grade of storage battery discharge instrument can be customized according to demands | |||||||||||||
Discharge Current (single) | 0-30A | 0-50A | 0-60A | 0-30A | 0-60A | 0-80A | 0-100A | 0-50A | 0-100A | 0-150A | 0-50A | 0-100A | 0-150A |
Current Spreading | Meet the requirement for higher discharge current by machine's parallel operation | ||||||||||||
Discharge Current Setting Pace | 0.1A | ||||||||||||
Precision of Current Stabilization | ±0.5% | ||||||||||||
Precision of Voltage Measurement | ±0.5% | ||||||||||||
Display Mode | LCD Display in English | ||||||||||||
Data Communication Interface | USB (the test data can be exported through the UÂ disk) | ||||||||||||
Control Interface | RS485 | ||||||||||||
Data Storage Media | Built-in FLASH memory, support power down storage | ||||||||||||
Working Power Supply | Dual Power Supply Modes:1)provided by the storage battery while connecting battery pack, no need external power supply;2)provided by AC electricity supply via power adapter while without battery pack. | ||||||||||||
Backstage Software | Support Operating System: Win2000/XP/7 | ||||||||||||
Dimension(cm) |
Our Service:Intellectual Property and Certificate:Operation tos:Application Industry:How to choose good battery discharge tester ?Usually meet necessary points as follows: 1. Must use PTC heating low failure rate.2. Must use constant current discharge mode and can automatic count the battery capacity.3. Discharge accuracy : â¤Â±0.5% , discharge current ripple coefficient : â¤Â±0.1%4. End condition can choose battery voltage ,discharge current, continuous time and total capacity.  Information