vertical aluminum aging furnace
 Aluminum aging furnace, aluminum aging furnace vertical, vertical aluminum aging furnace for aluminum alloy hardening (solid solution processing), its structure has a hot air circulation passage, and take two-zone temperature control, so that temperature uniformity expanded unit thermal efficiency. Quench tank to the furnace just below, so as to shorten the transfer quenching time, improve the quality of work hardening. Workpiece material out of the door frame and the door opening and closing are electronically controlled, easy to operate. Rooms are equipped with interlock operation, safe and reliable. Available Light alloy and aluminum billet, pipe, bar, plate, sheet, vehicle wheels, homogenized aluminum cylinder heads and other artifacts, etc., heating, and other solid solution heat treatment.
 Aluminum aging furnace shell, lining, circulating fan, wind deflector, heating systems, baskets lifting mechanism, door, electrical control composed.
 Aluminum alloy aging furnace shell with welded steel for frames. Inner and outer walls are made of high-quality cold-rolled steel production, thermal deformation coefficient is small, h aluminosilicate refractory fiber blanket acupuncture for insulation and insulation materials, reduce the temperature rise of the furnace wall.
 Loading the car with the hardening furnace common.
 Door casing is also used as a frame of steel weld, the outer wall also produced cold rolled steel, also h needle blanket aluminosilicate refractory fibers for insulation and insulation materials.
 Mouth around the embedded rubber asbestos packing, after the door shut and mouth snapping rubber asbestos packing, to ensure that no heat dissipation.
 Aluminum aging furnace heating heaters, are arranged on both sides of the furnace and trolley surface 0Cr25Al5 resistance igh resistance alloy r tube titanium tube production, and long service life. In order to ensure uniformity of furnace temperature, electric fan means and provided ventilation system. Ventilator device is mounted to the top of the furnace, the fan used 1Cr18Ni9Ti heat-resistant steel production, centrifugal. Ventilation system by a wind deflector and plates. Deflector mounted on top of the furnace, there are guide duct. After turning on the fan, the wind from the fan thrown through the guide duct evenly blown on both sides of the heater chamber, through the lower part of the windshield blown furnace vent, and then guide the lower portion of the fan air suction fan inside, then thrown ......, and so forth cycle, the heat generated by the heater into the furnace, the workpiece is heated evenly.
Â
Vertical aluminum aging hardening furnace technology parameters: | parameter name | Unit | Model |
| RCL-45-6 | RCL-50-6 | RCL-55-6 | RCL-60-6 | RCL-70-6 | RCL-85-6 |
| Rated Power | KW | 45 | 50 | 55 | 60 | 70 | 85 |
| Rated Voltage | V | 3se/380V | 3se/380V | 3se/380V | 3se/380VÂ | 3se/380VÂ | 3se/380V |
| Highest temperature | ℃ | 650 | 650 | 650 | 650 | 650 | 650 |
| Operating temperature | ℃ | 650 | 650 |  650 | 650 | 650 | 650 |
| of district heating | Area | 1 | Â 2 | |
