Automatic pipe beveling machine

Numerical Control Pipe End Beveling Machine (PLC)

u Model: EPEBM-16Ca; EPEBM-24Ca/32Ca/40Ca/48Ca/60Ca

u Performance features

Ø The pipe end beveling machine consist of machine body, power unit, profile cutting mechanism, electric lifting mechanism, hydraulic unit, radial feed mechanism, axial feed mechanism, electric controls etc; The machine body welding by steel plate, impacteds structure; Electric Motor using to top brand of China; Operator panel in both of Chinese and English;

Ø On-ormance: good (designed as per onpment of production an>

Ø Bevel efficiency ≤3Min/pipe bevel（DN200 SCH80, V type bevel ）

Ø Bevel cutting: cutting off pipe with another equipments such as band saw m/c and then machining bevel for each pipe

Ø Bevel quality: very good, surface finish quality up to above

Ø Error of perpendicularity after beveling φ325～630:≤1.0mm;

Ø Suitable for heavy wall thickness pipe, especially for S.S, A.S etc with U, V and double V type bevel etc processing.

Ø Pass CE Certificate

u Technical Parameters:

Ø Pipe Dia: DN50-400 (φ 57-426mm ); DN100-600mm（φ114-630 mm）;DN200-800(φ219-830 mm); DN300-1000 (Ï); DN400-1200 (Ï); DN 400-1500 (Ï)

Ø Wall thickness: 4-90MM; 6-180MM;6-180MM ; 10-120MM; 10-90MM; 10-90MM

Ø Material Applicable: carbon steel, alloy steel, stainless steel and cryogenic steel, ect.

Ø Bevel shape: I, V, U, X, J, double V etc

Ø Cutting Direction: Radial Automatic Differential Cutting Feed Or Axial Automatic Motor Cutting Feed (Inlet Frequency);

Ø Retracting Direction: Radial Automatic Motor Retracting Or Axial Automatic Motor Retracting (Inlet Frequency);

Ø Driven By: electric motor

Ø Clamping system: Work piece Both sides centering clamping by hydraulic; work piece is clamped by hydraulic cylinder automatically

Ø Bracket system: Nil if equipped for conveyor (or screw lifting adjustable)

Ø Rev of the principal axis: stepless speed control & variable frequency

Ø Axial displacement: 80MM (principle axis) ; 100 MM (machine head); 150MM (principle axis) ; 300 MM (machine head)

Ø Widthwise displacement : ±50mm; ±100MM

Ø Bevel angle of tool rest: 0°-37.5°adjustable ; 0°-30°adjustable and more than 30 °by PLC controlled.

Ø Control system: PLC Controlling With Human Machine Interface Touch Screen

Ø Overall dimension (M): 2.2*1.5*1.55; 2.2*1.7*2.0; 2.8*1.7*2.3; 2.8*2.2*2.5; 2.9*2.7*2.5; 3*2.9*2.8

Ø Gross weight (KGS): 2500±5%; 4500±5%; 5000±5%;6000±5%; 9000±5%; 12000±5%

Ø Input voltage : 3power supply 380/415V/440V-350/60Hz（As per request）

Ø Mechanical aligning: be equipped for pipe roller conveying system with auto lifting (jacking) system & auto turning around device at the end of beveling machine, so as to adjust the center elevation of the pipe mechanically if necessary, and accommodate to bevel machining for different pipe diameter.

u Power Unit:

Ø Power Of Dynamic Head Motor: 4 KW ; 7.5 KW; 15 KW; N=1450 RPM, 380V/415/440V

Ø Rev. of main shaft: stepless speed control & variable frequency

Ø Tool rest differential feed rate: S= 0-0.28mm/R, selection as per profile tool post, the max cutting 3-6mm (4-8mm for 16Ca)

u Cutting Head:

² Dia of cutter head: Ø 450mm; Ø 650mm; Ø 830mm; Ø1050’; Ø 1250; Ø 1550

² Bevel Angle: 0-37.5°(adjustable), Adjust bevel angle more than 30 °by PLC controlled.

² (Differential Cutting feed)

² Float rate for floating tool holder: ±5 mm (Axial workpiece)

u Hydraulic System (for EPEBM-16Ca/24Ca/32Ca/40Ca/48Ca/60Ca)

² System Rate Working Pressure: 10 Mpa

² Max Pressure: 14 Mpa

² Rev. rate working of Motor: 57 RPM

² Rate working torque: 250 N.m

² Max Torque: 330 N.m

² Power of Hydraulic Pump Motor : 1.5 KW