ATC dry powder thermal insulation mortar plant line

Introduction:

The production ains feed-mixing-storage-metering-packaging. widely used in the production of various dry powder mortar, such as masonry mortar, adhesive mortar, crack resistant mortar, mortar king, inside and outside wall putty powder, plastering gypsum. ceramic tile adhesive, sealing agent and dry powder chemical materials mixing.

Characters:

1. Automatic, reasonable design of equipment, exnt performance, simple operation, low maintenance cost, effective production, labor saving and lower production cost.

2. The mortar with fiber ingredients, it can effectively solve the problem of fiber dispersion in polymer dry mortar. Its is stable, high efficiency, mixing uniform, no dead angle.

3. It is less investment, quick effect, small footprint and simple operation. 2-4 people can operate, and the daily output (8 hours) is 5-16 tons.

4. It is reasonable price, high performance, and low maintenance cost. It has helped many customers successfully occupy the building materials market.

Use and maintenance:1. Installation: machinery placed stable, machine feet flat. 2. Before use, please add oil to the refueling place, and then empty running machine to check whether the fasteners are loose, the electrical is normal, the machinery is running normally, if there are abnormal, do repair and debug.3. Feeding amount can not exceed the specified weight. It is strictly prohibited to fully loading. Close the charging cover and start the machine to run. If there is any abnormality, it must be shut down for inspection.4. Clean in time. change material must rinse the hopper inside and outside.5. Forbidden to start or stop machine on heavy loading, If necessory, please open the emergency exit and empty or release half of the material.