12L/hour mist maker industrial ultrasonic humidifier

12L/hour mist maker industrial ultrasonic humidifier

I. Installation Method

A. The materials needed for the installation of PVC pipes are: PVC pipes with a diameter of 110 mm, 110MM tees and 110MM plugs. If the dining table is longer, 110MM through joints and PVC glue are needed. First, we need to measure the length of the spray well and record it well in the fog location. We need to drill the drill bit of 20MM with the electric drill. (Note: the opening must be on the sides and the upper part of the tube, and the hole can not be opened in the lower part of the tube, so that the water in the pipe will flow out of the hole.) When installing, the joints of each side should be adhered with PVC glue to prevent leakage.

The materials needed for B. to be installed with stainless steel pipes are as follows: they need to look for stainless steel works nearby to measure the specific dimensions, and make stainless steel pipes according to the requirements of the above drawings, and then connect them with the sprayer. Specific requirements are: 110mm diameter stainless steel pipe, length according to the actual needs of the shop length, and then one or both sides of stainless steel pipe mist hole with diameter of 20MM. (Note: The opening must be on both sides and the upper part of the pipe. The opening must not be in the lower part of the pipe, so that the accumulated water in the pipe will flow out of the hole.) When installing, each side joint should be fully welded to prevent leakage.

Warranty:

1.We offer 1 year warranty period,any replacement parts(non man-made damage) will be provided without charge.

2.We provide the technical support service all the time.

3.Please feel free to us by onage or for further assistance if you have any problem.

Note:

1.Import duties,taxes and charges are buyer's responsibility,not included in the price or shipping charge.

2.Wholesale and customized orders are available,please feel free to us for inquiry.

Model: DYJ-1012

Ultrasonic frequency: 1.7MHz

Ultrasonic power: 1200W

Power supply voltage: AC220V 10% 50Hz（Voltage can be customized according to requirements）

Product size (mm):600 x 380 x 480

Humidification amount: 12L/hour

Application area: 110-130 square meters 2.5 meters tall

Automatic wet control: can be achieved unattended, can set the humidity you need (99% ~ 10%)

Automatic feed water

Shell material: stainless steel paint

Working temperature: 10℃<40℃