PUMP | 420MPA |
Â
High precision factory price 150MM stainless steel gear cutting CNC water jet cutting machine
high speed 420Mpa 3 axis CNC Â with new technology of us can make the machine moving speed to 20-30M/MIN, so it will reduce your half using cost!!!!!!
 we can provide local service in SOUTH AFRICA, RUSSIA,USA,UAE,CHILE,BRAIZIL,ECADUOUR,CANADA NOW and other countries we will arrange our factory engineer for installation.
Advantage:
Â
1. we promise 2 years( 2500 hours) warranty always. and have got CE certificate
Â
2. we use flow type cutting head, the cutting efficiency is at least 10% higher.
Â
3. the abrasive sand hopper beside the cutting head is also flow design.
Â
4. we have new technology that can make the machine moving speed is to 20-30m/min. normal speed is 6m/min as you see. if this technology used in pure water cutting, the cutting cost will reduce 50%. if using other materials cutting like glass , marble, steel, the cutting cost will also 20-30% reduced. but of course , the machine with this function price will be a little higher.
Â
5. we use soft cover of the ider, can prevent dust away from the ider, so keep the ider keep precision longer.
Â
6. we assemble an auto oil feeding to ider, so customer needn't maintenance the ider always.
Â
7. seperated body.
Â
8. we will send a remote control pendent.
Â
9. we have the world most convenient abrasive sand removing system. it can be used for any brand water jet cutting machine, maybe you can promote this system in your country and other countries. please check the attachment.
Â
11. we supply 420mpa pump with 37KW motor, but the price of  the whole machine is very competitive now.
Â
12. we use variable pump, so can reduce electricity cost for customers.
Â
13. we can do 220V and 415v also.
Â
14. like height tracking system, positioning system , we can also provide.
Â
15. all our components are SCHNEIDER brand
Â
16. the motor and PLC are SIEMENS brand.
Â
17. we can provide 5 axis with 10 degree and 3D 5 axis with 60 degree. we don't provide 4 axis, according to experience, 4 axis cutting head precision keeping time is too short, this will effect customer's using feeling.
Â
18. Â use 10mm steel for water tank supporter and use 8mm steel for beam, keep the machine working more stable.
Â
19. use JAPAN YASKAWA servo motor.
Â
20. imported TAIWAN TBI ball screw and ider
Â
21. imported USAÂ intensifier and TAIWAN accumulator and high pressure assembly and low pressure assembly. if you have special requests, we can also do.
Â
Â
Â
Â
Main technical parameter of water jet cutting machine | ||
Intensifier Pump | Item | Parameter |
     | Model | WMT3742Z |
 | motor | SIEMENS |
 | Method of Direction Regulation | Electronic direction regulation |
 | Pressure Range | 50-420MPA, continuous pressure is 330-380Mpa |
 | Maximum Flow of Hydraulic Pump | 90 L/min |
 | Maximum Discharge Capacity | 3.7 L/min |
 | Maximum Diameter of Gem Nozzle | 0.33 mm |
 | Power of Master Motor | 37 KW |
 | Power Source | 380V/50HZ, also work at 220V/60HZ, 415V |
Cutting Table | Item | Parameter |
 | X axis Characteristic | use strong 10MM steel, 3000MM cutting range. The cutting table width is 3200mm |
 | Y axis Characteristic | Cast iron is used as the foundation base , 2000MM cutting range . The cutting table length is 2200mm. |
 | Z axis Characteristic | Z axis double irc; guide and four sliding block , 180MM, CAN DO 200MM |
 | Control Accuracy | ±0.01mm, cutting accuracy is ±0.1mm, reposition accuracy: ±0.02mm, max travelling speed:6000mm/min, we have new technology that can make the travelling speed 20-30m/min.   |
 | ider | TAIWAN TBI BRAND |
 | Table Ctructure | Separated body, can be delivered by one 20'FCL container |
 | Driving Way | Servo drive system |
 | CNC system | Ncstudio ,Fagor |
 | Servo Motor | SIEMENS motor |
 | Cutting Head | Casting structure and Concrete structure |
 | Sealing Way |
|