TYPE : Flicker type SNV308.2Â Â
SUMMARY
SNV308.2 series overhead type Fault Indicator system is based on the Sensor that through CT get the (6KV-50KV) n>âs current an>, through smart computer chip(IC) by program calculating, Analysis ,judge the short circuit or ground fault. When Sensor detect the fault happen, then the Fault indicator warn the manager through Flashing one big ultra red led and one ultra green led. It is good for power managing user to find the fault happen reason and place, then fast solve the problem and make the power restore.
*SNV308.2 Fault Indicator with the aid of the remote control PDA(SNV306.2), User can read, reset the indicatorâs setting parameter, and can read the on time current etc
 Â
DESCRIPTION
SNV series indicators suitable for overhead pan>network under a 50KV, for remotes short circuit &Earth fault indicator, through measuring the current of a conductor cable, to judge the fault on the power ording to the change of current, grounding fault, and the fault state, real time current, battery voltage and other information. is uploaded to the remote server, which provides reliable data for the various types of fault diagnosis and location of overhead an>
Production Character:
l real-time sampling of current per cycleï¼ Â Â Â Â Â Â
l ultra low power real-time samplingï¼
l When ent valueâ§5Aï¼CT can supply meet the indicator power requirement
l Sampling accuracy:  I<10A±1%ï¼I>10A±2%
l Sensor factory automatic calibration, to ensure consistencyï¼
l Support remote, telemetry, remote control, remote adjustï¼
l There are two piece LI-iron battery inside. Battery life:8-10year
1) 3.2V,600mah lithium -iron rechargeable battery for working
2)3.6V,2700mah lithium -iron battery for back up
Battery life:8-10year
Â
Part of test character:
l Temperature affect test: 2 hours, -40°c ~+70°c
l Moisture and heat performance test,24hours.  high temp. 55°c,  low-temp 25°c, humidity 93%
l Short circuit current impact test, 16KA, 2 second
l Insulator Test:   1) Insulator resistance testãâ¥10 MΩ   2) Dielectric strength test, 1min,AC 2KV.
l IP protection level test, IP67:  Anti âdust IP6X  Anti-water: IPX7
l Spring clip strong: 8 times self-weight.
l fire-protection rating: 5 grade
Function charactera. real time measurement of three-se on entï¼
b. Detection and judgment of short circuit faultï¼
a) support the judgment of the threshold fault current, short circuit faultï¼
b) supports Judgment of mutated incremental currents delta for short-circuit faultsï¼
c)Â support for reclosing identificationï¼
Â
c. Data Upload functionï¼
a)Â periodically upload real-time onent, zero sequence current, and battery voltageï¼
b)Â Upload the fault status, the fault elimination status and the fault current value in real timeï¼
d. Parameter setting
a)Â Available to change the parameter setting through computer by factory.
b)Â Available to change and set the parameter though Remote control PDAï¼
e. Support communication through remote control PDA;
a)Â Available reading and change setting parameterï¼
b)Â PDA can read Indicator sensor state , Real time ent, battery voltage data.
c)Â PDA can simulate the ont test through setting Indicatorâs parameter.
f. 3 colors to indicate different state.(red, green, yellow)
g. Support ower charge for batteryï¼
h. Support timing reset, power on auto reset, remote resetï¼
i. can be efficiently mounted and unloadedï¼
j. The structure parts are made of antirust and anticorrosion materialï¼
k. In waking up state(ng model),During 7 minutes, without operate, there will be auto reset.(Tips: in waking up state, FI prohibited fault test)
The fault indicator type flicker SNV308.2 has an ultra-bright, 360°red LED and a green LED pointing to the bottom for fault indication. Additionally it ha a yellow LED pointing to the bottom to tional status.
1) Red LED:  when permanent fault happen , the red LED will flash,  1 flash very 1 second.
2) Green LED:  when Fault is temporary fault happen. The red LED will flash, at same time, additional green h every 1 second.   ( Temporary fault character :  when fault happen, and power off, but re-closer close successful, and power on again).
3)Â Yellow LED:
Yellow LED ating state of the fault indicator. Operating states are:
__yellow LED does not blink, Â means fault indicator is on service state
__yellow LED blinks every second, means fault indicator is in radio mode
__yellow LED blinks every 3rd second, meanings the battery is running low