Melamine molding powder finished wares with surface hardness unsurpassed by any other plastics. Molded parts have exnt resistance to abrasion, boiling water, detergents, weak acids and weak alkalis as well as acidic foods and extracts.
Melamine is particularly well-suited for molding food products, including quality dinnerware for domestic and commercial food service.
Melamine molded articles are specifically approved for food Additional applications include Serving Trays, Buttons, Ashtrays, rmaceutical Closures, Wiring Devices, Cutlery and Kitchen utensil handles.
Melamine molding powder  are suitable for both compression molding and are available in fine powder forms
Melamine molding powder in powder form are basedon melamine-formaldehyderesins fortified with high-class loseas reinforcement and further modified with minor amounts of specialpurpose additives, pigments, cure regulators and lubricants.
Melamine molding powder  can be supplied in most colours from translucent pastels to black.Moulded parts are free from odour, light stable and have good moisture resistance.Hard and Glossy surface with exnt scratch and chemical resistance. Fats, oils and common organicsolvents like alcohol and acetone do not attack the materials and they are also resistant tosurfactants and weak bases. They will also withstand attack from weak acids fro a shorter duration.
Moulding condition
Temperature | 150-180°C |
Pressure | 25-40Mpa |
Curing time | 35-50âS |
Â
1 | Gravity | D2525,⤠| 1.6 | GB1033 |
2 | Specific volume | ml/g⤠| 3 |  |
3 | Volatile matter | %,⤠| 3.8 | GB/T13455 |
4 | Water absorb (cold) / (hot) | mg,⤠| 50/65 | GB1034 |
5 | Shrinkage | % | 0.65 | GB13454 |
6 | Distortion temperature | °O,⥠| 155 | GB1634 |
7 | Flowing | mm | 194 | GB13454 |
8 | Impact Strength(notch) | KJ/m2,⥠| 1.9 | GB1043 |
9 | Bending Strength | Mpa,⥠| 80 | GB9341 |
10 | Insulation Resistance after 24h in water | MΩ⥠| 105 | GB1410 |
11 | Dielectric strength | MV/m,⥠| 9.0 | GB1408 |