Acid Cellulase for Textile Bio-polishing

SUKAL1000

Acid lase for Bio-polishing

Quick Details

Brand Name

SUKA/p>

Model:

L1000

Origin:

China

Usage:

Acid lase for Bio-polishing

Specification

1.Appearance Medium to dark amber liquid

2.Odor Slight fermentation odor

3.(as is) 4.5±1.0, Optimum: 4.8

4.Density 1.05-1.20

5.Temperature 40°C- 60°C, Optimum 55°C

Brief Introduction

SUKAL1000 is an enzyme preparation obtained from the submerged fermentation of a high lase-producing microbial strain. It is widely used in textile and garment stone wash industries.

Packing

25kg/drum in bulk

Dosage

0.25-2.0% owg

Advantage

• SUKAL1000 - is a kind of acidic liquid lase, used for biofinishing, significantly soften 100% cotton fabrics, both woven and knits.

• SUKAL1000 – provide soft touch except used for jean leaven dye processing.

• SUKAL1000 - can obviously improve clothing surface magnitude.

OPERATION

DOSAGE

Biofinishing

Stonewashing

Desize thoroughly

Desize thoroughly

Desize thoroughly

Drain liquor then fill machine to liquor ratio of

1-10 (jean/ water)

1-10 (jean/ water)

Add pumice (if required), heat bath to

40-60°C

50-60°C

Add SUKAL1000

at the rate of

0.25-2.0% owg

0.25-0.75% owg

Adjust to

4.5-5.5,with 4.8 as an optimum

4.5-5.5,with 4.8 as an optimum

Process time

20-45 minutes

(depending on desired effect)

30-45 minutes

(depending on desired effect)

After drainage

add water and softening

add water and softening

Note:

Some denim fabrics of lower quality may have severe backstaining problems that can be overcome with our ES resist.

Use soda ash 1-3 grams and resist ES 1-2 grams (water ratio) to wash out ferment remaining residue, after that you can adopt our consistent lubricant/ film/ organic silicon oil.