Manufacturer | Xi'an Gaoke Building Material Technology Co., Ltd. |
Click System | Unilin |
Wear Layer | 0.3mm, 0.4mm, 0.5mm, 0.6mm |
Residual Indentation | 0.15-0.4mm |
Fireproof | B1 |
Formaldehyde | E0 |
IXPE Mute Mat | Optional |
IXPE Thickness | 1mm, 1.5mm, 2mm |
Antibacterial Species | Staphylococcus, E.Coli, Fungi |
Seam Strength | >1.5kN/M |
Heat Stability | Dimensional change rate ≤0.25%, Heating warpage ≤2.0mm, Cold and hot warpage ≤2.0mm |
Decoration Layer | North American Walnut Block |
SPC Flooring
Stone plastic composite flooring, SPC flooring, is a new type of high-quality ground decoration material. It adopts natural marble powder to form a solid base with high-density and high fiber mesh structure, and its surface is covered with super wear-resistant polymer ethylene wear-resistant layer, which is processed through hundreds of processes. Polyvinyl chloride resin is an environmentally friendly, non-ewable material.
Specifications
Manufacturer: GKBM
Brand: Greenpy
Series: NT Series Stone Grain Flooring
Decoration layer: North American Walnut Block
Product Name: Stone Plastic Composite Flooring (SPC Flooring)
Normal size: 1220*183mm (popular choice), 304.8*609.6mm
Thickness: 4mm, 5mm, 6mm
Wear Layer: 0.3mm, 0.5mm, 0.6mm
IXPE mute mat: Optional
IXPE thickness: 1 mm, 1.5mm, 2 mm
Formaldehyde: E0
Fireproof: B1
Antibacterial species: Stalococcus, E.coli, fungi
The antibacterial rate against Escherichia coli and Stalococcus aureus reaches 9999%
Residual indentation: 0.15-0.4mm
Heat Stability: Dimensional change rate â¤0.25%
Heating warpage: â¤2.0mm,
Cold and hot warpage: â¤2.0mm
Seam Strength: â¥1.5KN/M
Warranty: 20-30 Years
Packing: Carton
Single pack: 1238*195*55mm - 13 pcs/carton; 2.9m2/carton
Features:
1. Green and environmental protection:
2. Ultra-light and ultra-thin:
3. Super wear resistance: 4mm, 5mm, 6mm,
4. High elasticity and super impact resistance
5. Super anti slip
6. Fire retardant
7. Waterproof and moisture-proof
8. Sound absorption and noise prevention
9. Antibacterial properties
10. Small joint and seamless welding
11. Cutting and splicing are simple and easy
12. Quick installation and construction
13. A wide variety of designs and colors
14. Acid and alkali corrosion resistance
15. Thermal insulation
16. Convenient maintenance
17. Environmental protection and renewable
18. International Fashion
Advantages
Installation Steps
Installation Notes: 1.The temperature should be kept between 10-30 °C; Place SPC floors at a constant temperature for 24 hours before paving; the humidity should be kept within 40%. 2. Basic ground requirements:(1) The height difference within the 2m level shall not exceed 3mm, otherwise self-leveling cement construction is required to level the ground.(2) If the ground is damaged, the width should not exceed 20cm and the depth should not exceed 5m, otherwise it needs to be filled. (3) If there are protrusions on the ground, it must be smoothed with sandpaper or leveled with a ground leveler.3. It is recommended to lay a silent pad (moisture-proof film, mulch film) with a thickness of less than 2mm first. 4. A minimum 10mm expansion joint must be reserved between the floor and the wall. 5. The maximum length of horizontal and vertical connection must be less than 10m, otherwise it must be cut off.6. During the installation process, do not use a hammer to forcibly hit the floor to prevent damage to the floor slot (groove). 7. It is not recommended to install and lay it in places such as bathrooms and toilets that are soaked in water for a long time. 8. It is not recommended to lay in outdoor, open-air balcony sun room and other environments. 9. It is not recommended to lay it in places that are not used or inhabited for a long time.
Ordering Info