HarshMet has developed a range of cable grips tailored for the renewable energy sector for use in:
For wind turbines, special features have been adapted to allow for minimal with the actual cable while still allowing exnt working loads and cable support.
The HarshMet Wind Turbine Support Grip is manufactured from 316 Stainless Steel and provides cable support and control inside the wind turbine. It features rounded copper ferrules and offers reduced cable for high vibration environments.
Custom grips can be adapted to meet any requirement.
Part /strong> | Cable Diameter | Bale Length | Mesh Length | Approx Break Strength |
HGPL1216 | 0.50-0.61"(12.7-15.5mm) | 4"(101.6mm) | 11"(279.4mm) | 770 lbs. |
HGPL1519 | 0.62-0.74"(15.7-18.8mm) | 4"(101.6mm) | 11"(279.4mm) | 1150 lbs. |
HGPL1925 | 0.75-0.99"(19.1-25.1mm) | 4"(101.6mm) | 14"(355.6mm) | 1320 lbs. |
HGPL2532 | 1.00-1.24"(25.4-31.5mm) | 5"(127.0mm) | 15"(381.0mm) | 1920 lbs. |
HGPL3238 | 1.25-1.49"(31.8-37.8mm) | 5"(127.0mm) | 16"(406.4mm) | 1920 lbs. |
HGPL3844 | 1.50-1.74"(38.1-44.2mm) | 6"(152.4mm) | 18"(457.2mm) | 1920 lbs. |
HGPL4450 | 1.75-1.99"(44.5-50.5mm) | 6"(152.4mm) | 20"(508.0mm) | 3150 lbs. |
HGPL5063 | 2.00-2.49"(50.8-63.2mm) | 6"(152.4mm) | 22"(558.8mm) | 3360 lbs. |
HGPL6375 | 2.50-2.99"(63.5-75.9mm) | 6"(152.4mm) | 24"(609.6mm) | 3360 lbs. |
HGPL7588 | 3.00-3.49"(76.2-88.6mm) | 8"(203.2mm) | 26"(660.4mm) | 5280 lbs. |
HGPL8899 | 3.50-3.99"(88.9-101.3mm) | 8"(203.2mm) | 28"(711.2mm) | 5280 lbs. |