Grate Electrode Artificial grate electrode is made of high-quality low ash materials, such as petroleum coke, needle cokeand coal pitch.after calcining,burdening,kneading,forming,baking and pressure impregnation, gratizationand then precision machined with professional CNC of the products own characteristics withlow resistivity, good electrical conductivity ,low ash, compact structure,good anti oxidation and high mechanical strength, so it is the best conductive material for electric arc furnace and smelting furnace. Grate electrode size detail:
RP / HP / SHP / UHP Grate electrode | ||||||
Standard sizes of electrode | ||||||
Specification ( Inch ) | Allow Diamater (mm) | Allowable Length (mm ) | ||||
Nominal Diamater | Max | Min | Nominal Length | Max | Min | |
6 | 150 | 154 | 151 | 1600 | 1700 | 1500 |
1800 | 1875 | 1700 | ||||
8 | 200 | 205 | 200 | 1600 | 1700 | 1500 |
1800 | 1875 | 1700 | ||||
9 | 225 | 230 | 225 | 1600 | 1700 | 1500 |
1800 | 1875 | 1700 | ||||
10 | 250 | 256 | 251 | 1600 | 1700 | 1500 |
1800 | 1875 | 1700 | ||||
12 | 300 | 307 | 302 | 1800 | 1875 | 1700 |
14 | 350 | 357 | 352 | 1600 | 1700 | 1500 |
1800 | 1875 | 1700 | ||||
16 | 400 | 409 | 403 | 1600 | 1500 | 1500 |
1800 | 1875 | 1700 | ||||
2100 | 2175 | 1975 | ||||
18 | 450 | 460 | 454 | 1800 | 1875 | 1700 |
2100 | 2175 | 1975 | ||||
2400 | 2475 | 2275 | ||||
20 | 500 | 511 | 505 | 1800 | 1875 | 1700 |
2100 | 2175 | 1975 | ||||
2400 | 2475 | 2275 | ||||
22 | 550 | 562 | 556 | 2100 | 2175 | 1975 |
2400 | 2475 | 2275 | ||||
24 | 600 | 613 | 607 | 2100 | 2175 | 1975 |
2400 | 2475 | 2275 | ||||
2800 | 2850 | 2550 | ||||
28 | 700 | 714 | 708 | 2400 | 2475 | 2275 |
2800 | 2850 | 2550 |
sical and chemical index
Item | RP | HP | UHP | |||||||||||||||||||||
Φ200-300 | Φ350-600 | Φ700 | Φ200-400 | Φ550-700 | Φ700 | Φ200-400 | Φ450-600 | Φ700 | ||||||||||||||||
ResistivityμΩM (Max) | Electrode | 7.5 | 8.0 | 6.5 | 7.0 | 5.5 | 5.5 | |||||||||||||||||
Nipple | 6.0 | 6.5 | 5.0 | 5.5 | 3.8 | 3.6 | ||||||||||||||||||
Bulk density g/cm³ | Electrode | 1.53 | 1.52 | 1.53 | 1.62 | 1.60 | 1.62 | 1.67 | 1.66 | 1.66 | ||||||||||||||
Nipple | 1.69 | 1.68 | 1.73 | 1.72 | 1.75 | 1.78 | ||||||||||||||||||
Bending strength Mpa | Electrode | 8.5 | 7.0 | 6.5 | 10.5 | 9.8 | 10 | 11 | 11 | |||||||||||||||
Nipple | 15.0 | 16.0 | 20.0 | |||||||||||||||||||||
Elastic modulus Gpa | Electrode | 9.3 | 9.0 | 12.0 | 12.0 | 14.0 | 14.0 | |||||||||||||||||
Nipple | 14.0 | 16.0 | 18.0 | 22.0 | ||||||||||||||||||||
Ash, % (Max) | Electrode | 0.5 | 0.3 | 0.3 | ||||||||||||||||||||
Nipple | ||||||||||||||||||||||||
CTE(100-600ºC) *10-6/ºC | Electrode | 2.9 | 2.4 | 1.5 | 1.4 | |||||||||||||||||||
Nipple | 2.8 | 2.2 | 1.40 | 1.2 |
Recommended current carrying capacity
Nominal diameter(mm) | RP | HP | UHP | ||||
Current carrying capacity | Current density | Current carrying capacity | Current density | Current carrying capacity | Current density | ||
in | mm | A | A/cm2 | A | A/cm2 | A | A/cm2 |
12 | 300 | 10000-13000 | 14-18 | 13000-17400 | 17-24 | 15000-22000 | 20-30 |
14 | 350 | 13500-18000 | 14-18 | 17400-24000 | 17-24 | 20000-30000 | 20-30 |
16 | 400 | 18000-23500 | 14-18 | 21000-31000 | 16-24 | 25000-40000 | 19-30 |
18 | 450 | 22000-27000 | 13-17 | 25000-40000 | 15-24 | 32000-45000 | 19-27 |
20 | 500 | 25000-32000 | 13-16 | 30000-48000 | 15-24 | 38000-55000 | 18-27 |
22 | 550 | 28000-34000 | 12-14 | 34000-53000 | 14-22 | 45000-65000 | 18-27 |
24 | 600 | 30000-36000 | 11-13 | 38000-58000 | 13-21 | 50000-75000 | 18-26 |
28 | 700 | 34000-42000 | 9-11 | 45000-72000 | 12-19 | 70000-120000 | 18-25 |
32 | 800 | 43000-54000 | 8-10 | ---- | ---- | ---- | ---- |