1.Details of ring gauge:
Material:Ring gauges are manufactured in both steel and tungsten Carbide,other material are availiable.
Sizes:Ring gauges are manufactured from Inner Diameter 3.5 mm. to 60 mm. Steel ring gauges and master setting rings are manufactured from Inner Dia. 1 mm. to 200 mm.
Description:Ring gauges have an outer steel casing, which protects the inner carbide ring.
Usage:Ring gauges are used to check the outside diameter of work pieces. The work piece is inserted into the Inner dia. Of the steel ring. If it passes through the GO ring gauge then it means that the work piece is good for its lower size limit. If the work piece does not pass through the NOGO ring gauge it means that the work piece is OK for the higher size limit. A ring gauge is also effective to check out of roundness on the higher side. A master setting ring is used as a standard to set bore gauges, which can then be used to determine deviation from the master size.
SPECIFICATIONS FOR M2-40 Thread Plug Ring Go and No Go Gauge | |||
Nominal diameter *Screw pitch | Nominal diameter *Screw pitch | Nominal diameter *Screw pitch | Nominal diameter *Screw pitch |
M2*0.4/0.25 | M6*1/0.75/0.5 | M16*2/1.5/1/0.75/0.5 | M28*2/1.5/1 |
M2.2*0.45/0.25 | M7*1/0.75/0.5 | M17*1.5/1 | M30*3.5/3/2/1.5/1/0.75 |
M2.5*0.45/0.35 | M8*1.25/1/0.75/0.5 | M18*2.5/2/1.5/1/0.75/0.5 | M32*2/1.5 |
M3*0.5/0.35 | M9*1.25/1/0.75/0.5 | M20*2.5/2/1.5/1/0.75/0.5 | M33*3.5/3/2/1.5/1/0.75 |
M3.5*0.6/0.35 | M10*1.5/1.25/1/0.75/0.5 | M22*2.5/2/1.5/1/0.75/0.5 | M35*1.5 |
M4*0.7/0.5 | M11*1.5/1.25/0.75/0.5 | M24*3/2/1.5/1/0.75 | M36*4/3/2/1.5/1 |
M4.5*0.75/0.5 | M12*1.75/1.5/1.25/1/0.75/0.5 | M25*2/1.5/1 | M38*1.5 |
M5*0.8/0.5 | M14*2/1.5/1.25/1/0.75/0.5 | M26*1.5 | M39*4/3/2/1.5/1 |
M5.5*0.5 | M15*1.5/1 | M27*3/2/1.5/1/0.75 | M40*3/2/1.5 |
Signup today to claim your Discount. Get Started before it's too late!
