API 15HR High pressure GRE pipe and fitting for Shengli xinda
High pressure fiberglass :It is glassfiber reinforced thermonsetting resin pipefactured by micro-controlled filament winding of expoxy resin and high- strength glassfiber roving.
Production rang:
1.Diameter:DN40-DN600 2.Pressure rating:3.45Mpa-34.5Mpa
Production standard: API 15HR-2001 /SY/T6267-2006 for high pressure fiberglass .
Range for Application:
1.Wastewater transmission or wastewater treatment pipe
2.High-pressure delivery petroleum, natual gas, sar, CO2 and H2S
3.Connecting pipes for storage tanks and fire hoses.
Production Characteristics;
1. Exnt mechanical and sical properties, light weight and high strength;
2.Good Corrosion resistance and long services life;
3.No buidup of scale and wax; no secondary contamination;
4. very Smooth inner wall and good flowability of media;
5.Good temperature resistance and can fully neet the requirement of oil production and injection processes;
6.Favorable compressive properties; the normal working pressures are 3.45Mpa to 34.5Mpa;
7. Easy installation and low comprehensive costs.
1. Acid anhydride eposy GRE (Design as per API 15HR)
ical properties: Density:121.74 LBS/ft³
Density:1.95g/cm³
Specific gravity:2.0
Flow Coefficient:
Hazen-Williams factor:C=150
Absolute Roughness:0.00021"(0.0052mm)
Thermaldynamic Properties:
Heat conductivity coefficient:0.23BTU/ft/hr/F°(0.40W/m °C)
Coefficient of pansion:6.1*10-5in/in °F(10*10‾6 mm/mm °C)
Elastic Coefficient:
Hoop Elastic Modulus:3.5*10000000Psi(21.1Gpa)
Axial Elatic Modulus:1.7*10000000Psi(11.9Gpa)
Poisson Ratio(mimimum):0.38
2. Amine Epoxy GRE (Design as per API 15HR)
ical properties: Density:112 LBS/ft³
Density:1.8g/cm³
Specific gravity:1.8
Flow Coefficient:
Hazen-Williams factor:C=150
Absolute Roughness:0.00021"(0.0053mm)
Thermaldynamic Properties:
Heat conductivity coefficient:0.23BTU/ft/hr/F°(0.40W/m °C)
Coefficient of pansion:68.8*10-6in/in °F(15.8*10‾6 mm/mm °C)
Elastic Coefficient:
Hoop Elastic Modulus:3.2*10000000Psi(22.8Gpa)
Axial Elatic Modulus:1.82*10000000Psi(12.6Gpa)
Poisson Ratio(mimimum):0.38
High pressure Fiberglass main parameters:
Nominal Diameter mm(in) | Rated Pressure Mpa(Psi) | Thread Spec (in) | ID mm | OD mm | Nominal Wall Thickness (mm) | Minimum Bending Radius (m) | Nominal Length (M) |
| DN40 1 1/2" | 12(1750) | 1.9 | 38 | 43.2 | 2.6 | 26 | 9 |
| 14(2000) | 44.6 | 3.3 | |||||
| 16(2300) | 45.9 | 4 | |||||
| 20(2900) | 47.2 | 4.6 | |||||
| 22(3200) | 48.6 | 5.3 | |||||
| 25(3600) | 49.9 | 5.9 | |||||
| DN50 2" | 10(1500) | 2 3/8 | 48 | 53.3 | 2.6 | 40 | |
| 12(1750) | 54.6 | 3.3 | |||||
| 14(2000) | 55.9 | 4 | 42 | ||||
| 18(2600) | 57.2 | 4.6 | |||||
| 20(2900) | 58.6 | 5.3 | |||||
| 22(3200) | 59.9 | 5.9 | |||||
| 25(3600) | 62.5 | 7.3 | 44 | ||||
| DN65 2 1/2" | 7(1000) | 2 7/8 | 60 | 65.2 | 2.6 | 48 | 9 |
| 10(1500) | 66.6 | 3.3 | |||||
| 12(1750) | 67.9 | 4 | 50 | ||||
| 14(2000) | 69.2 | 4.6 | |||||
| 16(2300) | 70.6 | 5.3 | |||||
| 18(2600) | 71.8 | 5.9 | |||||
| 20(2900) | 73.2 | 6.6 | 52 | ||||
| 22(3200) | 74.6 | 7.3 | |||||
| 25(3600) | 75.8 | 7.9 | 54 | ||||
| DN80 3" | 8.5(1250) | 3 1/2 | 76 | 82.5 | 3.3 | 60 | |
| 10(1500) | 77 | 4 | |||||
| 12(1750) | 78.2 | 4.6 | |||||
| 14(2000) | 79.6 | 5.3 | |||||
| 16(2300) | 80.8 | 5.9 | |||||
| 18(2600) | 83.6 | 7.3 | 62 | ||||
| 20(2900) | 84.8 | 7.9 | |||||
| 22(3200) | 86.2 | 8.6 | |||||
| 25-JG(3600) | 88.2 | 9.6 | 64 | ||||
| DN100 4†| 5.5(800) | 4 1/2 | 94 | 100.6 | 3.3 | 74 | 8.8 |
| 7(1000) | 101.9 | 4 | |||||
| 10(1500) | 104.5 | 5.3 | |||||
| 12(1750) | 105.9 | 5.9 | |||||
| 14(2000) | 108.5 | 7.3 | |||||
| 16(2300) | 109.8 | 7.9 | 76 | ||||
| 20(2900) | 112.5 | 9.2 | |||||
| 25-JG(3600) | 116 | 11 | |||||
| DN150 6†| 3.5(500) | 7 | 148.6 | 155.2 | 3.3 | 110 | 8.7 |
| 5.5(800) | 157.8 | 4.6 | |||||
| 7(1000) | 160.4 | 5.9 | |||||
| 8.5(1250) | 163.4 | 7.3 | |||||
| 10-JG(1500) | 135 | 152.2 | 8.6 | 112 | |||
| 12-JG(1750) | 153.4 | 9.2 | |||||
| 14-JG(2000) | 154.6 | 9.8 | |||||
| 16-JG(2300) | 158.0 | 11.5 | |||||
| DN200 8" | 3.5(500) | 8 5/8 | 194 | 201.9 | 4 | 130 | 8.6 |
| 5.5(800) | 205.8 | 5.9 | |||||
| 7(1000) | 208.6 | 7.3 | 135 | ||||
| 8.5-JG(1250) | 211 | 8.5 | |||||
| 10-JG(1500) | 9 5/8 | 209 | 230.4 | 10.7 | 140 | ||
| 12-JG(1750) | 235.4 | 13.2 | |||||
| 14-JG(2000) | 239.7 | 15.4 | |||||
| DN250 10" | 3.5(500) | 10 6/8 | 250 | 259.2 | 4.6 | 172 | |
| 4.5(650) | 262 | 6 | 174 | ||||
| 5.5(800) | 264.6 | 7.3 | 176 | ||||
| 7(1000) | 267.2 | 8.6 | 178 | ||||
| DN300 12" | 3.5(500) | Socket Locking | 300 | 316 | 8 | 210 | 11.2 |
| 5.5(800) | 326 | 13 | 215 | ||||
| DN400 16" | 3.5(500) | 400 | 422.6 | 11.3 | 235 | ||
| DN500 20" | 500 | 530 | 15 | 255 | |||
| DN600 24" | 600 | 638 | 19 | 275 |
Signup today to claim your Discount. Get Started before it's too late!
