8 ports fast 100Mbps POE switch with 2 giga uplink

8 Port 10/100Mbps POE Ethernet switch with 2GE uplink ports TS11P-8F-2G

Product Description:

The TS11P-8F-2G is a gigabit uplink 10/100Mbps unmanaged POE switch, which provides eight DATA+POE ports and two pure gigabit data port. Among them, port 1-8 follows the 802.3af/at standard and supports maximum power output of 30w. The POE ports of the switch can automatically detect and supply power to the PD devices that complies with the 802.3af/at standard. Otherwise, there is no power supply output. In addition, the switch supports auto-negotiating traffic control functions and is compatible with terminal devices of 10Mbps, 100Mbps.

The TS11P-8F-2G is usually used to provide power and data transmission for IP cameras, bridges, and IP . For terminal devices that do not support POE, the POE splitter can be used to provide power supply and data transmission.

The TS11P-8F-2G adopts plug-and-play design, which eliminates the need for software settings, which greatly facilitates the installation and use of digital monitoring and age. In particular, the switch provides a set of DIP switches for easy switching between shared or port isolation modes. In the port isolation mode, 1-8 ports cannot communicate with each other, only through port 9-10 to output data. This mode can effectively suppress the generation of broadcast storms.

Product Features:

Ø Comply with IEEE 802.3, 802.3i, 802.3u, 802.3x, 802.3ab, 802.3q, 802.3af/at specifications.

Ø 2*10/100/1000Mbps uplink ports, support for auto-negotiation.

Ø 8*10/100Mbps POE ports, support 802.3af/at standard, maximum 30w power output.

Ø internal max 120w power supply.

Ø Adopt Store-and-Forward transmission mode.

Ø Auto MDI-X function, self-adjusting straight-through ss-ection.

Ø 4K Mac address table

Ø One DIP switch supports port isolation setting and max 250m POE transmission（CCTV mode）

Ø Port status LEDs

Datasheet