Usage:
Insulation layer edge folding machine is mainly used for insulation layer edge folding of transformer coil,which make insulation structure in both size end of insulation layer.Improving coil mechanical strength and winding efficiency,lower material cost.
The machine overall structure,edge folding principle,operating and control method adopts the same equipment imported from USA.Shorten the development time,assure this machine high productivity,high reliability.
Component:
1.uncoil device 2.guiding device 3.pinhole forming device 4.edge folding passage 5.shape pressing device 6.belt pulling device 7.winding device components 8.electrical system and pneumatic system components
Key Technical diameter:
ZBJ-1500 | ||||
Inner hole:76mm | ||||
Shaped winding paper spec | Max.outer diameter:400mm | |||
200-800mm | ||||
0.08-0.25mm | ||||
5 | ||||
7mm/10mm(standard) | ||||
Speed of edge folding in shape | Knife outer diameter | Knife quantity | Power requirement |
|
1.1kw | ||||
3 se 4 | ||||
Air consumption 0.1M3/min | ||||
Air tube | ||||
Tell Us What You NEED |