Product Information
Item Name: | High quality CO2 laser machine for Skin care |
Item Code: | DM-801 |
Wavelength: | 10600nm |
Laser apparatus: | Sealed off laser device simulated by direct current |
Optical beam quality: | TEM00 |
Output power: | 30w |
Spot size: | 0.02~0.05mm2 |
Aiming beam: | Red semiconductor laser (635nm, less than 5mw) |
Beam transport device: | Articulated arm with 7-joint and balance weight |
Working mode: | Continuous operation |
Output Mode: | Continuous, single pulse, interval pulse and super pulse |
Scan scope: | Max 20mmx20mm |
Scan gracs: | Circle, triangle, square, rectangle,hexagon, ellipse, |
Scanning Mode: | Random , Normal and Midsplit scan |
Scanning speed: | More than 10m/s |
Energy: | 1- 30W |
Pulse width | 0.1-5.0ms |
Distance: | 0.1-2.6mm |
Input power: | 450VA |
Cooling system: | Water and air circulation |
Environment temperature: | 5℃~40℃ |
Relative humidity: | Less than 80% |
Power: | 220V, 50HZ |
Theory
This machine adopts CO2 laser technology and precise control of the scan technology,using the CO2 laser’s heat penetrating action, in the guidance of the scan precisescanning, 0.12mm diameter thin minimally invasive aperture was formed by lattice-shapedon the skin. Skin in the effect of the laser energy and heat, wrinkle or scar tissue wasuniform gasified instantaneous and formed minimally invasive hole as the center of themicro-heating zone, so as to stimulate the skin synthesize a large of new collagentissue. and thus start the tissue repair, collagen rearrangement of a series of body'snatural healing mechanisms. Fresh collagen random regenerate, make the treated areaof skin becomes smooth, firm, elastic, pores shrink, wrinkle reduction , bags under the eyesdisappear, the pigmentation disappear, superficial scar calm, skin texture and skin colorgradually improved significantly.
Application
•Fractional skin treatment has been used effectively to:•Reduce deep wrinkles on the face•Civatte•Tighten skin on the face and neck•Change the appearance of scars•Improve skin tone around eyelids, jowls and neck•Rejuvenate sun-damaged skin and improve texture•Remove pigmented lesions•Improve tone and texture on the chest, arms, and hands
Machine Introduction
1. Joints of seven light guide arm
By seven joint light guide arm to complete the laser beam transmission
The light guide arm is the role of the laser transmission to patients to operation site
(target).
2. Scanner
Gracs scanner can scan output, rectangular, round, hexagonal, triangular and
other gracs, the largest area of about 20 * 20mm2 scanning;
3. Main unit
It includes a high voltage power supply, a low-voltage power supply, control system,
cooling system, laser system and blowing system.
4. Touch display panel
Mainly used for parameter setting
5. Emergency stop switch
It is a push button switch. When the instrument is an exceptional condition, can
press the emergency stop switch to cut off the power supply system of instrument.
6. Key switch
A key into the key switch, go to the "open" position, the instrument power on, go to
the "off" position to cut off the power, turn off the instrument.
7. Wheels
8. Refrigeration head control switch
9. Refrigeration head power supply plug
10. Refrigeration water circulation joint
11. Vent
12. Foot switch socket
13. Internal debugging interface
14. Air switch (switch)
The total power supply control machine
15. The power input socket
16. Add the water faucet
17. Data ector
Used to connect the scanner data p>18. Aiming light switch (applicable to individual models)
Press this switch can be closed at the light.
19. Aiming light regulating potentiometer (applicable to individual models)
You can adjust brightness aiming light through a rotary potentiometer in the
treatment process.
20. Air blowing port
Company Informations:
Welcome to DIMYTH !